Hmm. I just had someone on anther group write in with issues involving a system with the ATI Raedon 7000. Their issue was different that yours, so it is probably a fluke.
A couple of questions... 1) Have you tried leaving one of the DIMMS out and moving the RAM around to see if you have a bad socket? 2) Do you have jumpers for the clock speed? A lot of boards report an incorrect clock speed because they use a jumper as a multiplier. There is a formula for computing the multipliers, but I do not have it handy. 3) Have you checked the mfg's site for trouble shooting tips specific to your hardware? 4) Have you removed and reseated your CPU, cards, etc? If not, be sure to try that. --- Kory Wnuk <[EMAIL PROTECTED]> wrote: > I have an interesting situation that I have not yet been able to > resolve. I > suspect that I am dealing with hardware issues. I have not ever > encountered > such and am therefore soliciting assistance. Any that can be > provided would > be greatly appreciated. > > System: > AMD 2000+ XP CPU > EPoX EP-8KHA+ Motherboard > 1GB PC2100 DDR RAM > ATI Raedon 7000 AGP (64 MB) > Typical CDROM, HD, FD, etc. > > This is the information I sent to EPoX: > --- > It should be noted that prior to the following events, the system > as > configured ran flawlessly: > > After a system lockup, a cold boot was required. The system was > found to > not be bootable. > > The POST code received during a boot attempt is C1h (the > motherboard > displays a hexadecimal code to help with trouble shooting. C1h > has to do > with memory problems). The existing memory was replaced with new > PC2100 > (non-ECC) 512 MB DDR DIMMs, the code remained C1h. The CPU Host > Clock was > set checked and found to be set to 133 MHz. > --- > > Again, any assistance in this matter would be greatly appreciated. > Thanks. > > -K > > P.S. I just returned from Houston after nearly 3 months. It sure > is good to > be home. > > > _______________________________________________ > General mailing list > [email protected] > http://brlug.net/mailman/listinfo/general_brlug.net ===== Warmest Regards, Doug Riddle http://www.dougriddle.com ## Firearms are second only to the Constitution in importance; they are the Peoples' Liberty Teeth." - George Washington ## __________________________________________________ Do You Yahoo!? Sign up for SBC Yahoo! Dial - First Month Free http://sbc.yahoo.com
