CMB <[EMAIL PROTECTED]> writes:

maybe some IOS flakiness (assuming cisco gear here)

> Last night, the network was humming along just fine.
>
> This morning, It appears that once the network got loaded down
> somewhat and started doing the freakin' thing again.
>
> Except, this one situation was slightly different than yesterdays.
>
> Using EtherApe, the network (from an ip viewpoint) would grow and
> shrink as would the ability
> to hit certain machines via tcpip.  Segments would join and leave the
> network at random intervals.
>
> EtherApe also allows monitoring at the ethernet level.  From that
> perpective, the network
> extents were complete and static..  IPX packets could bounce around
> all regions with no problem or loss..
>
> As far as the machines go, some routers (but not all) would do the low
> cpu utilization thing, then jump to nearly 100% utilization..and then
> go back down.
>
> We isolated some hardware - just enough for the plant to run; the
> front office
> is disconnected except for the servers.  The network is stable now (at
> least the half of it that is still juiced)
>
> Weird that it would do that ...All of the dark routers excpet for one
> had a solid and correct configuration.  The one bad apple consistantly
> misreported status with what was configured.  With the bad one  dark,
> the other ones freaked as well (even after cold starts) until their
> power was extenguished as well..   Waiting on spares ... to tide over
> until the network is replaced with a new one soon.
>
> I'd like to know if anyone else has seen anything remotely like this....
>
>
>
> _______________________________________________
> General mailing list
> [email protected]
> http://brlug.net/mailman/listinfo/general_brlug.net
>

-- 
Scott Harney<[EMAIL PROTECTED]>
"...and one script to rule them all."
gpg key fingerprint=7125 0BD3 8EC4 08D7 321D CEE9 F024 7DA6 0BC7 94E5

Reply via email to