Hi Michael, You mentioned FW version 3.05, while the latest is 3.5.0. Please, verify. Boris
________________________________ From: Mike Heinz [mailto:[EMAIL PROTECTED] Sent: Tuesday, April 29, 2008 10:30 AM To: Boris Shpolyansky; [email protected] Subject: RE: [ofa-general] Can't Initialize an MT23108 HCA Hey, Boris, I am, indeed, running current firmware. I'll try to isolate variables and see if I can focus on why this machine has a problem. -- Michael Heinz Principal Engineer, Qlogic Corporation King of Prussia, Pennsylvania ________________________________ From: Boris Shpolyansky [mailto:[EMAIL PROTECTED] Sent: Tuesday, April 29, 2008 12:42 PM To: Mike Heinz; [email protected] Subject: RE: [ofa-general] Can't Initialize an MT23108 HCA Hi Michael, MT23108 HCAs are supported. Please, update FW on your card to the latest version available from Mellanox web site at http://www.mellanox.com/support/firmware_table_IH.php Follow FW burning instructions provided there. Regards, Boris Shpolyansky Sr. Member of Technical Staff Applications Mellanox Technologies Inc. 2900 Stender Way Santa Clara, CA 95054 Tel.: (408) 916 0014 Fax: (408) 970 3403 Cell: (408) 834 9365 www.mellanox.com ________________________________ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mike Heinz Sent: Tuesday, April 29, 2008 9:38 AM To: [email protected] Subject: [ofa-general] Can't Initialize an MT23108 HCA I thought I'd posted this question on the group before, but looking through my notes I couldn't find that I had. My apologies if this is a repeat. I installed OFED 1.3.0.0.4 on a system with an older, MT23108 HCA running 3.05 firmware. The HCA is known to work with QuickSilver. When I rebooted I got this: Feb 18 13:06:02 newberry kernel: ib_mthca: Mellanox InfiniBand HCA driver v0.08 (February 14, 2006) Feb 18 13:06:02 newberry kernel: ib_mthca: Initializing 0000:04:00.0 Feb 18 13:06:02 newberry kernel: ACPI: PCI interrupt 0000:04:00.0[A] -> GSI 28 (level, low) -> IRQ 217 Feb 18 13:06:02 newberry kernel: ib_mthca 0000:04:00.0: PCI device did not come back after reset, aborting. Feb 18 13:06:02 newberry kernel: ib_mthca 0000:04:00.0: Failed to reset HCA, aborting. The system is running RHEL4, update 4, x86_64. Are older HCAs supported with OFED or can only Arbel and Connect-X type HCAs usable? -- Michael Heinz Principal Engineer, Qlogic Corporation King of Prussia, Pennsylvania
_______________________________________________ general mailing list [email protected] http://lists.openfabrics.org/cgi-bin/mailman/listinfo/general To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general
