It seems that you didn't check the same HCA in each arch.
Can you try to use the mthca device in PPC64 and check the results?
(Anyway, i would have suggest you to upgrade the OFED package that you are
using)
I apologize for my newbieness here but I do not understand what you mean.
The two machines have different devices. What do you mean by making
the ppc64 machine use the mthca when it does only have the mlx4?
Unfortunately, upgrading might not be an (easy) option :-/
Thanks for the patience
You have 2 machines, each with another device:
x86 has the HCA 25204
PPC64 has the HCA 25418
The fact that the test didn't pass for you on the PPC64 may be related
to this device
(i think that OFED 1.2.5 was the first version that supported this device).
So, i suggest that you'll put the HCA 25204 on the PPC64 and check if
the failure still exists.
Dotan
_______________________________________________
general mailing list
[email protected]
http://lists.openfabrics.org/cgi-bin/mailman/listinfo/general
To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general
