>> >> But I'm not sure about the fw version. As I mentioned, on that >> Mellanox page the latest firwmare for the IBM version is 2.3.00 which >> is the one I have. Or am I wrong? >> > > I checked Mellanox's site and i here is the URL for the FW of ConnectX: > http://www.mellanox.com/support/firmware_table_ConnectXIB.php > > In this page, i can see that the FW version is 2.5.000.
OK. I thought I could only use the FW version on the IBM table (I mentioned before) and not the one from the link you provide. >> >> I tried that as you said before but didn't help. >> And the RDMA read works fine. >> Of course, it is possible that the problem is with my code. In fact it >> looks every time closer to this possibility. But can the code be in >> such a way wrong that it works on x86 but not on ppc. That is what >> intrigues me. >> > > Pay attension that the changes from PPC64 to x86 is not only the pointer > size (64 vs. 32) and the > endianess issue. It is a different CPU architecture which may cause to many > differences. > > If you wish, i can review your code that handles IB offline... > Yes, it was in fact an endianess issue. I had some "wrong" pointers and then was being mislead by the printed values. Took a while but I learned something in between :) I will install ofed 1.3.1 to be on the stable side of the force. Many thanks, in particular to Dotan for his review and will to help me. Cheers _______________________________________________ general mailing list [email protected] http://lists.openfabrics.org/cgi-bin/mailman/listinfo/general To unsubscribe, please visit http://openib.org/mailman/listinfo/openib-general
