Hi,
Try both Login and Pasword as "root "
I am usingf the same "con:12345:respawn:/sbin/getty -L 115200 tty02 vt100"
for serial console.
Thanks,
Venkat Raju.
-----Original Message-----
From: "kumar sangakara" <[email protected]>
Sent: Friday, May 17, 2013 1:26pm
To: "Vikash Kumar" <[email protected]>, "Badri C"
<[email protected]>, "Raju Sana" <[email protected]>,
[email protected], [email protected]
Subject: Re: Tizen on pandaboard
Hi
I'm using the
[http://download.tizen.org/releases/previews/2.0alpha/ivi-panda/latest/images/ivi-2.0alpha-panda/]
http://download.tizen.org/releases/previews/2.0alpha/ivi-panda/latest/images/ivi-2.0alpha-panda/
tar gz file with my kernel and uboot
I'm able to get file system mounted.
But serial console,I'm not able to get.
I have tried all these
con:12345:respawn:/sbin/getty -L 115200 tty02 vt100
con:12345:respawn:/sbin/getty -L 115200 ttyS0 vt100
con:12345:respawn:/sbin/getty -L 115200 tty00 vt100
All seems to not work.
Also I have given the following in the /etc/rc.d/rc.sysinit script
/bin/loginLogin name: rootPassword: Tizenand its fails like this
(none) login: root
Password: (Typed Tizen)
Login incorrect
Also getting this on touch screen
Composite warning
"Your screen does not support OpenGL
Falling back to software engine"
Not getting Tizen UI
I understand opengl and drm rpm packages need to be installed through sdb . But
for that, i need to get the console at least.
I appreciate if you can Please help me on this ASAP
Regards
Prasanna
On Tue, Apr 16, 2013 at 10:23 AM, Vikash Kumar
<[mailto:[email protected]] [email protected]> wrote:
Hi,
Yeah you are right not every project need to be cloned, but I dont have the
list of the necessary projects.If you have, do share the same with me too.
For the build process, I used the same steps that are mentioned at the gbs
reference [https://source.tizen.org/documentation/gbs-build]
https://source.tizen.org/documentation/gbs-build .
First configure the ~/.gbs.conf file with the correct url under tizen repo
field, and then run the following command from inside the tizen directory.
sudo gbs build -A armv7l --include-all
Let me know if there is any problem with this.
Thanks,Vikash.
On Mon, Apr 15, 2013 at 2:35 PM, kumar sangakara <[mailto:[email protected]]
[email protected]> wrote:
Thanks for your reply.I think not every project need to be cloned.After
necessary things are cloned,How to build it all?
Also how did you build it?
RegardsKarthik
On Sat, Apr 13, 2013 at 12:46 PM, Vikash Kumar
<[mailto:[email protected]] [email protected]> wrote:
Hi,
Apologies for replying this late...:)
Ok so for cloning the entire source, I have followed the
[https://source.tizen.org/documentation/cloning-and-building]
https://source.tizen.org/documentation/cloning-and-building only.
Otherwise you can also this,
git clone
ssh://[http://[email protected]:29418/adaptation/alsa-scenario-scn-data-0-base]
[email protected]:29418/adaptation/alsa-scenario-scn-data-0-base
adaptation/alsa-scenario-scn-data-0-base
You have to clone every package separately, so its a bit troublesome process.
Another way is to use the steps written here
[http://gitorious.org/tizen-toys/tizen-manifest#more]
http://gitorious.org/tizen-toys/tizen-manifest#more
I didnt tried this because of some internal network problems. But you can try
this also.
For built tizen filesytem, I am using this
[http://download.tizen.org/releases/2.0/tizen-2.0_20130219.4/images/RD-210/RD-210-tizen-2.0_20130219.4.tar.gz]
download.tizen.org/releases/2.0/tizen-2.0_20130219.4/images/RD-210/RD-210-tizen-2.0_20130219.4.tar.gz
For uboot and kernel, I am using ubuntu kernel for Omap board. You can get this
at [http://omappedia.org/wiki/Prebuilt_ubuntu_binaries]
http://omappedia.org/wiki/Prebuilt_ubuntu_binaries
One more thing, I dont know you already tried this or not, but make 3 partition
on your sdcard, for boot, platform and data. 'dd' platform.img and data.img
(you will get this after untaring the above filesystem) over platform and data
partition.
I have tried all this but am also stuck at mounting of the filesystem.
Do let me know if I am wrong at any point.
Thanks,
Vikash
On Fri, Apr 12, 2013 at 12:13 PM, kumar sangakara <[mailto:[email protected]]
[email protected]> wrote:
Hi
Can you pl give me the commands you tried for coloing entire source?With
uboot,kernel and tizen filesystem?
Kindly give me the commands
Regardskarthik
_______________________________________________
General mailing list
[email protected]
https://lists.tizen.org/listinfo/general
