Meanwhile , try installing the image from https://download.tizen.org/snapshots/2.0alpha/ivi-panda/latest/images/ivi-2.0alpha-panda/ ivi-2.0alpha-panda-tizen-2.0a_20130507.4.tar.gz<https://download.tizen.org/snapshots/2.0alpha/ivi-panda/latest/images/ivi-2.0alpha-panda/ivi-2.0alpha-panda-tizen-2.0a_20130507.4.tar.gz>
For kernel configuration and startup guide please refer , https://wiki.tizen.org/wiki/Tizen_IVI_Getting_Started_Guide_For_PandaBoard It has installation procedure which may help you to solve this issue. Thanks & Regards, Badri On Fri, May 17, 2013 at 4:19 PM, [email protected] < [email protected]> wrote: > Subham from our team will reply you with full details.. Kept him in CC > > > Thanks & Regards, > Badri > > > On Fri, May 17, 2013 at 2:16 PM, <[email protected]> wrote: > >> Hi, >> >> >> >> Try both Login and Pasword as "root " >> >> >> >> >> >> I am usingf the same "con:12345:respawn:/sbin/getty -L 115200 tty02 >> vt100" for serial console. >> >> >> >> Thanks, >> >> Venkat Raju. >> >> >> >> >> >> -----Original Message----- >> From: "kumar sangakara" <[email protected]> >> Sent: Friday, May 17, 2013 1:26pm >> To: "Vikash Kumar" <[email protected]>, "Badri C" < >> [email protected]>, "Raju Sana" <[email protected]>, >> [email protected], [email protected] >> Subject: Re: Tizen on pandaboard >> >> Hi >> >> I'm using the >> http://download.tizen.org/releases/previews/2.0alpha/ivi-panda/latest/images/ivi-2.0alpha-panda/tar >> gz file with my kernel and uboot >> I'm able to get file system mounted. >> >> But serial console,I'm not able to get. >> I have tried all these >> con:12345:respawn:/sbin/getty -L 115200 tty02 vt100 >> con:12345:respawn:/sbin/getty -L 115200 ttyS0 vt100 >> con:12345:respawn:/sbin/getty -L 115200 tty00 vt100 >> >> All seems to not work. >> >> Also I have given the following in the /etc/rc.d/rc.sysinit script >> >> */bin/login Login name: root Password: Tizen* and its fails like this >> >> *(none) login: root >> Password: (Typed Tizen) >> Login incorrect* >> >> Also getting this on touch screen >> * >> Composite warning >> >> * >> *"Your screen does not support OpenGL >> * >> *Falling back to software engine"* >> >> Not getting Tizen UI >> >> I understand opengl and drm rpm packages need to be installed through sdb >> . But for that, i need to get the console at least. >> >> I appreciate if you can Please help me on this ASAP >> >> Regards >> Prasanna >> >> >> On Tue, Apr 16, 2013 at 10:23 AM, Vikash Kumar <[email protected] >> > wrote: >> >>> Hi, >>> >>> Yeah you are right not every project need to be cloned, but I dont have >>> the list of the necessary projects. >>> If you have, do share the same with me too. >>> >>> For the build process, I used the same steps that are mentioned at the >>> gbs reference https://source.tizen.org/documentation/gbs-build . >>> >>> First configure the ~/.gbs.conf file with the correct url under tizen >>> repo field, and then run the following command from inside the tizen >>> directory. >>> >>> sudo gbs build -A armv7l --include-all >>> >>> Let me know if there is any problem with this. >>> >>> Thanks, >>> Vikash. >>> >>> >>> On Mon, Apr 15, 2013 at 2:35 PM, kumar sangakara <[email protected]>wrote: >>> >>>> Thanks for your reply. >>>> I think not every project need to be cloned. >>>> After necessary things are cloned, >>>> How to build it all? >>>> >>>> Also how did you build it? >>>> >>>> Regards >>>> Karthik >>>> >>>> >>>> On Sat, Apr 13, 2013 at 12:46 PM, Vikash Kumar < >>>> [email protected]> wrote: >>>> >>>>> Hi, >>>>> >>>>> Apologies for replying this late...:) >>>>> >>>>> Ok so for cloning the entire source, I have followed the >>>>> https://source.tizen.org/documentation/cloning-and-building only. >>>>> >>>>> Otherwise you can also this, >>>>> >>>>> git clone ssh:// >>>>> [email protected]:29418/adaptation/alsa-scenario-scn-data-0-baseadaptation/alsa-scenario-scn-data-0-base >>>>> >>>>> You have to clone every package separately, so its a bit troublesome >>>>> process. >>>>> >>>>> Another way is to use the steps written here >>>>> http://gitorious.org/tizen-toys/tizen-manifest#more >>>>> >>>>> I didnt tried this because of some internal network problems. But >>>>> you can try this also. >>>>> >>>>> For built tizen filesytem, I am using this download.tizen >>>>> .org/releases/2.0/tizen-2.0_20130219.4/images/RD-210/RD-210-tizen >>>>> -2.0_20130219.4.tar.gz >>>>> >>>>> For uboot and kernel, I am using ubuntu kernel for Omap board. You can >>>>> get this at http://omappedia.org/wiki/Prebuilt_ubuntu_binaries >>>>> >>>>> One more thing, I dont know you already tried this or not, but make 3 >>>>> partition on your sdcard, for boot, platform and data. 'dd' platform.img >>>>> and data.img (you will get this after untaring the above filesystem) over >>>>> platform and data partition. >>>>> >>>>> I have tried all this but am also stuck at mounting of the filesystem. >>>>> >>>>> Do let me know if I am wrong at any point. >>>>> >>>>> Thanks, >>>>> >>>>> Vikash >>>>> >>>>> On Fri, Apr 12, 2013 at 12:13 PM, kumar sangakara >>>>> <[email protected]>wrote: >>>>> >>>>>> Hi >>>>>> >>>>>> Can you pl give me the commands you tried for coloing entire source? >>>>>> With uboot,kernel and tizen filesystem? >>>>>> >>>>>> Kindly give me the commands >>>>>> >>>>>> Regards >>>>>> karthik >>>>>> >>>>> >
_______________________________________________ General mailing list [email protected] https://lists.tizen.org/listinfo/general
