Subham from our team will reply you with full details.. Kept him in CC
Thanks & Regards, Badri On Fri, May 17, 2013 at 2:16 PM, <[email protected]> wrote: > Hi, > > > > Try both Login and Pasword as "root " > > > > > > I am usingf the same "con:12345:respawn:/sbin/getty -L 115200 tty02 > vt100" for serial console. > > > > Thanks, > > Venkat Raju. > > > > > > -----Original Message----- > From: "kumar sangakara" <[email protected]> > Sent: Friday, May 17, 2013 1:26pm > To: "Vikash Kumar" <[email protected]>, "Badri C" < > [email protected]>, "Raju Sana" <[email protected]>, > [email protected], [email protected] > Subject: Re: Tizen on pandaboard > > Hi > > I'm using the > http://download.tizen.org/releases/previews/2.0alpha/ivi-panda/latest/images/ivi-2.0alpha-panda/tar > gz file with my kernel and uboot > I'm able to get file system mounted. > > But serial console,I'm not able to get. > I have tried all these > con:12345:respawn:/sbin/getty -L 115200 tty02 vt100 > con:12345:respawn:/sbin/getty -L 115200 ttyS0 vt100 > con:12345:respawn:/sbin/getty -L 115200 tty00 vt100 > > All seems to not work. > > Also I have given the following in the /etc/rc.d/rc.sysinit script > > */bin/login Login name: root Password: Tizen* and its fails like this > > *(none) login: root > Password: (Typed Tizen) > Login incorrect* > > Also getting this on touch screen > * > Composite warning > > * > *"Your screen does not support OpenGL > * > *Falling back to software engine"* > > Not getting Tizen UI > > I understand opengl and drm rpm packages need to be installed through sdb > . But for that, i need to get the console at least. > > I appreciate if you can Please help me on this ASAP > > Regards > Prasanna > > > On Tue, Apr 16, 2013 at 10:23 AM, Vikash Kumar > <[email protected]>wrote: > >> Hi, >> >> Yeah you are right not every project need to be cloned, but I dont have >> the list of the necessary projects. >> If you have, do share the same with me too. >> >> For the build process, I used the same steps that are mentioned at the >> gbs reference https://source.tizen.org/documentation/gbs-build . >> >> First configure the ~/.gbs.conf file with the correct url under tizen >> repo field, and then run the following command from inside the tizen >> directory. >> >> sudo gbs build -A armv7l --include-all >> >> Let me know if there is any problem with this. >> >> Thanks, >> Vikash. >> >> >> On Mon, Apr 15, 2013 at 2:35 PM, kumar sangakara <[email protected]>wrote: >> >>> Thanks for your reply. >>> I think not every project need to be cloned. >>> After necessary things are cloned, >>> How to build it all? >>> >>> Also how did you build it? >>> >>> Regards >>> Karthik >>> >>> >>> On Sat, Apr 13, 2013 at 12:46 PM, Vikash Kumar < >>> [email protected]> wrote: >>> >>>> Hi, >>>> >>>> Apologies for replying this late...:) >>>> >>>> Ok so for cloning the entire source, I have followed the >>>> https://source.tizen.org/documentation/cloning-and-building only. >>>> >>>> Otherwise you can also this, >>>> >>>> git clone ssh:// >>>> [email protected]:29418/adaptation/alsa-scenario-scn-data-0-baseadaptation/alsa-scenario-scn-data-0-base >>>> >>>> You have to clone every package separately, so its a bit troublesome >>>> process. >>>> >>>> Another way is to use the steps written here >>>> http://gitorious.org/tizen-toys/tizen-manifest#more >>>> >>>> I didnt tried this because of some internal network problems. But >>>> you can try this also. >>>> >>>> For built tizen filesytem, I am using this download.tizen >>>> .org/releases/2.0/tizen-2.0_20130219.4/images/RD-210/RD-210-tizen >>>> -2.0_20130219.4.tar.gz >>>> >>>> For uboot and kernel, I am using ubuntu kernel for Omap board. You can >>>> get this at http://omappedia.org/wiki/Prebuilt_ubuntu_binaries >>>> >>>> One more thing, I dont know you already tried this or not, but make 3 >>>> partition on your sdcard, for boot, platform and data. 'dd' platform.img >>>> and data.img (you will get this after untaring the above filesystem) over >>>> platform and data partition. >>>> >>>> I have tried all this but am also stuck at mounting of the filesystem. >>>> >>>> Do let me know if I am wrong at any point. >>>> >>>> Thanks, >>>> >>>> Vikash >>>> >>>> On Fri, Apr 12, 2013 at 12:13 PM, kumar sangakara >>>> <[email protected]>wrote: >>>> >>>>> Hi >>>>> >>>>> Can you pl give me the commands you tried for coloing entire source? >>>>> With uboot,kernel and tizen filesystem? >>>>> >>>>> Kindly give me the commands >>>>> >>>>> Regards >>>>> karthik >>>>> >>>>
_______________________________________________ General mailing list [email protected] https://lists.tizen.org/listinfo/general
