Hello, Find the answers below, please
On Fri, Jan 17, 2014 at 2:24 AM, Jaehoon Chung <[email protected]>wrote: > Hi, Jacek. > > If you can enter to download mode, then i think your phone isn't bricked > yet. > But it need to consider some condition. > > I want to know a few information. > > 1. Your phone have been worked fine before. > Yes, I have upgraded the firmware several times before. Upgrade procedure and OS worked well. > 2. how did your phone change this status? > I was trying to downgrade the firmware from 2.2.1 to 2.2 on Linux Virtual Machine with 512MB of RAM. It finished about 30% with the message: "In some cases lthor needs enough memory. Please check free memory in your host PC and unload some heavy applications" > 3. When did you get the reference board? > I have received the device in May 2013 (based on i9300) > 4. Can you enter the download mode? > Yes, the download mode is activated automatically, just after "A mistake was made while downloading, a binary should be downloaded again." message. Best Regards, Jacek > > If you give me the information, it's helpful to me. > > Best Regards, > Jaehoon Chung > > On 01/17/2014 07:51 AM, Jacek Kalamarz wrote: > > dmesg shows: > > [ 322.880215] usb 1-2: new full-speed USB device number 3 using ohci-pci > > [ 323.346237] usb 1-2: New USB device found, idVendor=04e8, > idProduct=685d > > [ 323.346243] usb 1-2: New USB device strings: Mfr=1, Product=2, > SerialNumber=0 > > [ 323.346246] usb 1-2: Product: SLP > > [ 323.346249] usb 1-2: Manufacturer: SAMSUNG > > [ 323.398366] cdc_acm 1-2:1.0: This device cannot do calls on its own. > It is not a modem. > > [ 323.398403] cdc_acm 1-2:1.0: ttyACM0: USB ACM device > > [ 323.404227] usbcore: registered new interface driver cdc_acm > > [ 323.404228] cdc_acm: USB Abstract Control Model driver for USB > modems and ISDN adapters > > > > Any idea? > > > > > > On Mon, Jan 13, 2014 at 9:47 AM, Jacek Kalamarz <[email protected]<mailto: > [email protected]>> wrote: > > > > Hello, > > > > I have already checked this page. I'm using Ubuntu Server 13.10 > (without GUI) and there is no modemmanager package installed. > > > > The files descibed in Option 2 doesn't exist > > > > Jacek > > > > > > On Mon, Jan 13, 2014 at 12:08 AM, Leon Anavi <[email protected]<mailto: > [email protected]>> wrote: > > > > Hi Jacek, > > > > Several months I also had lthor handshare issue with similar > error message on Ubuntu. The issue was caused by modemmanager. Check the > available options to solve it at the Tizen wiki: > https://wiki.tizen.org/wiki/__Troubleshooting_lthor_on___Ubuntu_12.10 < > https://wiki.tizen.org/wiki/Troubleshooting_lthor_on_Ubuntu_12.10> > > > > Best regards, > > Leon > > > > > > On 2014-01-13 01:27, Jacek Kalamarz wrote: > > > > I failed to upgrade the PQ device to tizen 2.2. I'm using > VirtualBox > > with Ubuntu 13.10 to run lthor tool. > > > > $ LTHOR TIZEN_RD-PQ_SYSTEM_20130716_1.__TAR > > > > went OK, but > > > > $ LTHOR TIZEN-2.2_20130719.3_RD-PQ.__TAR.GZ > > > > > > finished about 30% with the message: > > "In some cases lthor needs enough memory. Please check free > memory in > > your host PC and unload some heavy applications" > > > > Since that moment the phone runs with the message: > > "A mistake was made while downloading, a binary should be > downloaded > > again." > > > > I have added more memory to VM (0.5GB to 2GB) and tried to > flash > > again. When I connect the cable, phone switches to Download > mode, but > > lhor returns: > > > > $ LTHOR TIZEN-2.2_20130719.3_RD-PQ.__TAR.GZ > > > > LINUX THOR DOWNLOADER, VERSION 1.4 > > AUTHORS: JAEHOON YOU <[email protected] <mailto: > [email protected]>> > > > > USB PORT IS DETECTED : /DEV/TTYACM0 > > > > LINE 348: FAILED TO READ SIGNATURE BYTES > > LINE 641: HANDSHAKE FAILED > > LINE 970: FAILED TO OPEN PORT (NULL) > > > > > > There is also the message in dmesg (when the phone is > connected) that > > I suppose was no there before upgrade: > > > > CDC_ACM 1-2:1.0: THIS DEVICE CANNOT DO CALLS ON ITS OWN. IT > IS NOT A > > MODEM. > > > > > > I have read the page: > https://bugs.tizen.org/__jira/browse/TDIST-580 < > https://bugs.tizen.org/jira/browse/TDIST-580> > > [1] but there is no exact solution. > > > > > > The s-boot (Vol-Up + Vol-Down + Pwr) loads properly, what > can I check > > there? > > > > What else can I do to run the device? > > > > Thanks in advance, > > Jacek > > > > > > > > Links: > > ------ > > [1] https://bugs.tizen.org/jira/__browse/TDIST-580 < > https://bugs.tizen.org/jira/browse/TDIST-580> > > > > _________________________________________________ > > General mailing list > > [email protected] <mailto:[email protected]> > > https://lists.tizen.org/__listinfo/general < > https://lists.tizen.org/listinfo/general> > > > > > > -- > > http://anavi.org/ > > _________________________________________________ > > General mailing list > > [email protected] <mailto:[email protected]> > > https://lists.tizen.org/__listinfo/general < > https://lists.tizen.org/listinfo/general> > > > > > > > > > > > > _______________________________________________ > > General mailing list > > [email protected] > > https://lists.tizen.org/listinfo/general > > > >
_______________________________________________ General mailing list [email protected] https://lists.tizen.org/listinfo/general
