Hello Andreas
On 19-Feb-01, you wrote:
>> My Devs/Network Draw only has appp.device in it - cannot find
>> appp0.config, is it part of GENESiS Prefs?
>
> appp0.config is the configuration for the appp.device on unit 0. Usually
> it looks the same like the stuff written in the text gadget when you
> change from PPP over SLIP to "Specify SANA2 Device" in the GENESiS prefs
> config for the interfaces.
>
> appp0.config is not saved in devs:networks/ but in ENV:SANA2/. It will be
> written there upon setting an interface to ONLINE. No need to store it in
> ENVARC: or on disk, at all.
>
> If you use PPP you just have to set the cycle (see above) to PPP. That
> does it.
>
> Use the GENESiS-Wizard to configure a first-time connection. It does all
> that is needed for you. It did at least for me for 5 different ISPs intwo
> different countries.
That's the problem, it is set to PPP. I used the Wizard to configure the
three ISP's I use. I use ntlworld as it is totally free. It is random
problem but at least it doesn't freeze my computer. I also use a fully
registered Miami and if that says it has failed to locate the DNS servers,
that's it I have to re-boot.
Thanks for your time,
All the Best,
Paul C.
--
Amiga A1200 in Eytech Tower, 030 accelerator, 2 Mb Chip RAM, 32Mb Fast RAM,
4.3 Gb HD, 24x CD ROM, OS 3.9, Epson 460, Turboprint 7.16
____________________________________________________________
Genesis Mailing List - Info & Archive: http://www.vapor.com/
For Listserver Help: <[EMAIL PROTECTED]>, "HELP"
To Unsubscribe: <[EMAIL PROTECTED]>, "UNSUBSCRIBE"
