On 2013-06-10 6:38 AM, Alan McKinnon <[email protected]> wrote:
On 10/06/2013 12:34, Tanstaafl wrote:
If I remember to manually unmount the NFS mount before initiating the
reboot/shutdown, it doesn't hang.
I'm guessing that it hangs at /var because it is the last mountpoint
defined in my /etc/fstab?
So... any pointers on where to look for a resolution would be appreciated.
Resolution being, if I can manually unmount it fine, why can't the
system auto-unmount it?
Let's get some facts to work with
can you post your fstab,
Fyi, I don't have either of these auto-mounting in fstab, but here it is:
# <fs> <mountpoint> <type> <opts> <dump/pass>
# NOTE: If your BOOT partition is ReiserFS, add the notail option to
# opts.
/dev/sda1 /boot ext2 noauto,noatime 1 2
/dev/sda2 none swap sw 0 0
/dev/sda3 / ext3 noatime 0 1
/dev/sda4 /backups ext3 noatime 0 2
/dev/vg2/home /home reiserfs noatime 0 0
/dev/vg2/usr /usr reiserfs noatime 0 0
/dev/vg2/var /var reiserfs noatime 0 0
/dev/cdroms/cdrom0 /mnt/cdrom iso9660 noauto,ro 0 0
/dev/fd0 /mnt/floppy auto noauto 0 0
# NOTE: The next line is critical for boot!
none /proc proc defaults 0 0
# glibc 2.2 and above expects tmpfs to be mounted at /dev/shm for
# POSIX shared memory (shm_open, shm_unlink).
# (tmpfs is a dynamically expandable/shrinkable ramdisk, and will
# use almost no memory if not populated with files)
shm /dev/shm tmpfs nodev,nosuid,noexec 0 0
rc-update show,
# rc-update show
apache2 | default
bootmisc | boot
consolefont | boot
devfs | sysinit
device-mapper | boot
dmesg | sysinit
dovecot | default
fsck | boot
hostname | boot
hwclock | boot
iptables | default
keymaps | boot
killprocs | shutdown
local | default nonetwork
localmount | boot
lvm | boot
mailman | default
modules | boot
mount-ro | shutdown
mtab | boot
mysql | default
net.eth0 | default
net.lo | boot
netmount | default
ntp-client | default
ntpd | default
postfix | default
procfs | boot
root | boot
rpcbind | default
savecache | shutdown
sshd | default
swap | boot
swapfiles | boot
sysctl | boot
sysfs | sysinit
syslog-ng | default
termencoding | boot
tmpfiles.setup | boot
udev | sysinit
udev-mount | sysinit
udev-postmount | default
urandom | boot
vixie-cron | default
xinetd | default
/etc/exports on the NFS server
Well... there is no 'NFS Server', these are two QNAP boxes that I can
enable NFS on... I guess there may be a way to command-line into them to
check that, so if it critical to answering the question, I'll see what I
can do. All I know for sure is, if I manually unmount it with umount
/mnt/qnap-mountpoint, it unmounts immediately.
and the mount options used for the NFS mounts?
The command I use to mount it is:
mount -t nfs -o mountproto=tcp qnap1:/backups /mnt/qnap1
Thanks Alan, hopefully something jumps out at you...
