This dont show anything ._. Here my dmseg complete: bpaste.net/show/186667
And my .config from kernel: http://bpaste.net/show/186668 2014-03-08 21:53 GMT-03:00 Canek Peláez Valdés <can...@gmail.com>: > On Sat, Mar 8, 2014 at 6:12 PM, Facundo Curti <facu.cu...@gmail.com> > wrote: > > Hi all. I'm again :P (I'm becoming an annoying). > > > > I have a realtek 8111F ethernet. > > > > I boot from a live-usb, make an lspci -v and says ethernet uses r8169 > > module. > > > > I compiled my kernel with this module, and when I start the system eth0 > does > > not exist (Just lo), and a lspci -v says anything about modules. > > > > Also I tried doing modprobe r8169 with no errors, but I still with out > eth0. > > > > So, any ideas why it is happening? :/ > > > > As always.. I hope make me understand, my english is no too good > > > > Thank you list! Bytes! ;) > > In your system (booting directly, not with LiveCD), do: > > dmesg | grep -i 8169 > > I'm pretty sure you will need some kind of firmware for your card. The > logs in dmesg will tell. > > Regards. > -- > Canek Peláez Valdés > Posgrado en Ciencia e Ingeniería de la Computación > Universidad Nacional Autónoma de México > >