2014-03-09 1:50 GMT-03:00 Canek Peláez Valdés <can...@gmail.com>: > On Sat, Mar 8, 2014 at 10:28 PM, Facundo Curti <facu.cu...@gmail.com> > wrote: > > This dont show anything ._. > > > > Here my dmseg complete: bpaste.net/show/186667 > > > > And my .config from kernel: http://bpaste.net/show/186668 > > Please don't top-post. > > You have the module compiled in the kernel. That should not be a > problem, but perhaps for debugging having it as a module would help > (to see what happens when you rmmod and modprobe it). > > From the kernel source code, it seems that the module requires some > firmware. Do you have linux-firmware installed? If not, install it and > see if now gets recognized. > > From the logs, the only acknowledgement of your network card I see are > the following lines: > > [ 0.191153] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 > [ 0.191167] pci 0000:03:00.0: reg 10: [io 0xe000-0xe0ff] > [ 0.191193] pci 0000:03:00.0: reg 18: [mem 0xf0004000-0xf0004fff 64bit > pref] > [ 0.191211] pci 0000:03:00.0: reg 20: [mem 0xf0000000-0xf0003fff 64bit > pref] > [ 0.191279] pci 0000:03:00.0: supports D1 D2 > [ 0.191280] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold > [ 0.191305] pci 0000:03:00.0: System wakeup disabled by ACPI > > That is weird, if it's a firmware problem, it should complain about it > in the logs. > > From your system, what does lspci says? > > Regards. > -- > Canek Peláez Valdés > Posgrado en Ciencia e Ingeniería de la Computación > Universidad Nacional Autónoma de México > > Sorry about top posting, My bad. Gmail jaja. I need to find a email client :P
Thank you for help. I'm trying to install firmware as you sugest. But now I have the problem, when I do modprobe r8168 it says: Error: Could not insert 'r8168': Function not implemented
