the...@sys-concept.com wrote: > On 12/19/2015 02:04 PM, John Runyon wrote: >> Not proc, but you should add nofail to scanner. >> >> John Runyon >> Sent from my phone >> >> On Dec 19, 2015 2:59 PM, the...@sys-concept.com wrote: >>> On 12/19/2015 12:57 PM, Alexander Kapshuk wrote: >>> [snip] >>> >>>>> It seems I'm not the only one: >>>>> https://forums.gentoo.org/viewtopic-t-1034770-highlight-localmount.html >>>>> >>>>> "The problem was openrc-0.18.4. When I downgraded to openrc-0.16.4 the >>>>> problem went away." >>>>> >>>>> Now, I can not downgrade without eth0 working. >>>>> Do I need to boot strap and downgrade or is there is easier solution? >>>>> >>>>> -- >>>>> Thelma >>>>> >>>>> >>>>> >>>> Here is a news item that explains the situation. >>>> >>>> 2015-10-07-openrc-0-18-localmount-and-netmount-changes >>>> Title OpenRC-0.18 localmount and netmount changes >>>> Author William Hubbs <willi...@gentoo.org> >>>> Posted 2015-10-07 >>>> Revision 1 >>>> >>>> The behaviour of localmount and netmount is changing on Linux systems. >>>> In the past, these services always started successfully. However, now they >>>> will fail if a file system they attempt to mount cannot be mounted. >>>> >>>> If you have file systems listed in fstab which should not be mounted at >>>> boot time, make sure to add noauto to the mount options. If you have >>>> file systems that you want to attempt to mount at boot time but failure >>>> should be allowed, add nofail to the mount options for these file >>>> systems in fstab. >>>> >>> This is my fstab: >>> /dev/hda1 /boot ext2 noauto,noatime 1 1 >>> /dev/hda3 / ext3 noatime 0 1 >>> /dev/hda2 none swap sw 0 0 >>> /dev/hda4 /home ext3 noatime 0 1 >>> >>> /dev/hdd /mnt/cdrom auto noauto,ro,users 0 0 >>> /dev/hdd /mnt/dvdr auto noauto,users >>> 0 0 >>> >>> # Scanner >>> none /proc/bus/usb usbfs defaults,devmode=0666 0 0 >>> >>> none /proc proc defaults 0 0 >>> >>> Does it mean I should add: "nofail" to Scanner and "/proc" line? > OK, I've added "nofail" to Scanner, and still no network after boot. > > -- > Thelma > >
I'd try adding nofail to all except / and /home. Then remove one at a time until it fails again and that should be the one that is messing with you. Dale :-) :-)
