Hi, I'm trying to switch ISPs over to Bell South. I can not get it to connect up though. I have tried wvdial and Kppp with no luck. This is what I am getting.
> [EMAIL PROTECTED] / # wvdial > WvDial<*1>: WvDial: Internet dialer version 1.56 > WvDial<*1>: Initializing modem. > WvDial<*1>: Sending: ATZ > WvDial Modem<*1>: ATZ > WvDial Modem<*1>: OK > WvDial<*1>: Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > WvDial Modem<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > WvDial Modem<*1>: OK > WvDial<*1>: Modem initialized. > WvDial<*1>: Sending: ATDT*70,4952462 > WvDial<*1>: Waiting for carrier. > WvDial Modem<*1>: ATDT*70,4952462 > WvDial Modem<*1>: CONNECT 26400/V34/NONE > WvDial<*1>: Carrier detected. Waiting for prompt. > WvDial<Notice>: Don't know what to do! Starting pppd and hoping for > the best. > WvDial<Notice>: Starting pppd at Tue May 29 17:57:20 2007 > WvDial<Notice>: Pid of pppd: 15088 > WvDial<*1>: Using interface ppp0 > WvDial<*1>: pppd: ([06][08][18][06][08] > WvDial<*1>: pppd: ([06][08][18][06][08] > WvDial<*1>: pppd: ([06][08][18][06][08] > WvDial<*1>: pppd: ([06][08][18][06][08] > WvDial<*1>: pppd: ([06][08][18][06][08] > WvDial<*1>: Disconnecting at Tue May 29 17:57:50 2007 > WvDial<*1>: The PPP daemon has died: A modem hung up the phone (exit > code = 16) > WvDial<*1>: man pppd explains pppd error codes in more detail. > WvDial<Notice>: Try again and look into /var/log/messages and the > wvdial and pppd man pages for more information. > WvDial<Notice>: Auto Reconnect will be attempted in 5 seconds >From /var/log/messages > May 29 17:53:48 smoker pppd[11949]: pppd 2.4.4 started by root, uid 0 > May 29 17:53:48 smoker pppd[11949]: Using interface ppp0 > May 29 17:53:48 smoker pppd[11949]: Connect: ppp0 <--> /dev/ttyS1 > May 29 17:54:18 smoker pppd[11949]: LCP: timeout sending Config-Requests > May 29 17:54:18 smoker pppd[11949]: Connection terminated. > May 29 17:54:18 smoker pppd[11949]: Modem hangup > May 29 17:54:18 smoker pppd[11949]: Exit. > May 29 17:55:35 smoker pppd[27516]: pppd 2.4.4 started by root, uid 0 > May 29 17:55:35 smoker pppd[27516]: Using interface ppp0 > May 29 17:55:35 smoker pppd[27516]: Connect: ppp0 <--> /dev/ttyS1 > May 29 17:56:05 smoker pppd[27516]: LCP: timeout sending Config-Requests > May 29 17:56:05 smoker pppd[27516]: Connection terminated. > May 29 17:56:05 smoker pppd[27516]: Modem hangup > May 29 17:56:05 smoker pppd[27516]: Exit. When I tried to use Kppp, I got this error: > May 29 17:59:29 smoker pppd[2131]: pppd 2.4.4 started by dale, uid 1000 > May 29 17:59:29 smoker pppd[2131]: using channel 403 > May 29 17:59:29 smoker pppd[2131]: Using interface ppp0 > May 29 17:59:29 smoker pppd[2131]: Connect: ppp0 <--> /dev/ttyS1 > May 29 17:59:29 smoker pppd[2131]: sent [LCP ConfReq id=0x1 <asyncmap > 0x0> <magic 0xe7380598> <pcomp> <accomp>] > May 29 17:59:32 smoker pppd[2131]: sent [LCP ConfReq id=0x1 <asyncmap > 0x0> <magic 0xe7380598> <pcomp> <accomp>] > May 29 17:59:35 smoker pppd[2131]: sent [LCP ConfReq id=0x1 <asyncmap > 0x0> <magic 0xe7380598> <pcomp> <accomp>] > May 29 17:59:38 smoker pppd[2131]: sent [LCP ConfReq id=0x1 <asyncmap > 0x0> <magic 0xe7380598> <pcomp> <accomp>] > May 29 17:59:41 smoker pppd[2131]: sent [LCP ConfReq id=0x1 <asyncmap > 0x0> <magic 0xe7380598> <pcomp> <accomp>] > May 29 17:59:44 smoker pppd[2131]: sent [LCP ConfReq id=0x1 <asyncmap > 0x0> <magic 0xe7380598> <pcomp> <accomp>] > May 29 17:59:47 smoker pppd[2131]: sent [LCP ConfReq id=0x1 <asyncmap > 0x0> <magic 0xe7380598> <pcomp> <accomp>] > May 29 17:59:50 smoker pppd[2131]: sent [LCP ConfReq id=0x1 <asyncmap > 0x0> <magic 0xe7380598> <pcomp> <accomp>] > May 29 17:59:53 smoker pppd[2131]: sent [LCP ConfReq id=0x1 <asyncmap > 0x0> <magic 0xe7380598> <pcomp> <accomp>] > May 29 17:59:56 smoker pppd[2131]: sent [LCP ConfReq id=0x1 <asyncmap > 0x0> <magic 0xe7380598> <pcomp> <accomp>] > May 29 17:59:59 smoker pppd[2131]: LCP: timeout sending Config-Requests > May 29 17:59:59 smoker pppd[2131]: Connection terminated. > May 29 17:59:59 smoker pppd[2131]: Modem hangup > May 29 17:59:59 smoker pppd[2131]: Exit. I did a google search and nothing made sense to me. I did try adding lcp-max-configure 30 to /etc/ppp/options though. Still no go. Anybody have a clue on how to fix this?? Thanks Dale :-) :-) -- www.myspace.com/-remove-me-dalek1967 Copy n paste then remove the -remove-me- part. -- [EMAIL PROTECTED] mailing list
