Am Sonntag 19 August 2007 schrieb Michael Gisbers: > Am Sonntag 19 August 2007 schrieb Florian Philipp: > > Am Sonntag 19 August 2007 16:52:37 schrieb Michael Gisbers: > > > Am Samstag 18 August 2007 schrieb Florian Philipp: > > > > Am Donnerstag 16 August 2007 20:28:43 schrieb Florian Philipp: > > > > > Am Donnerstag 16 August 2007 13:03:40 schrieben Sie: > > > > > > Am Mittwoch 15 August 2007 21:07:49 schrieb Michael Gisbers: > > > > > > > Am Mittwoch 15 August 2007 schrieb Florian Philipp: > > > > > > > > Okay, I've found option.ko and airprime.ko. tail -f > > > > > > > > /var/log/messages still doesn't output anything. Might that > > > > > > > > be a configuration issue (syslog-ng? kernel?)? > > > > > > > > > > > > > > Which kernel do you use? > > > > > > > > > > > > suspend2-2.6.22-r1 > > > > > > > > > > > > I fact, this machine NEVER produced any output to > > > > > > /var/log/messages. It's completely empty. Its only content is the > > > > > > gzip-header when logrotate compresses the empty file once a week. > > > > > > > > > > /var/log/messages works now. (syslog-ng's sync had to be set to 1). > > > > > > > > > > Unfortunately, that does not solve my problem. airprime, option, > > > > > usbserial and ftdi_sio are compiled as modules and loaded. Yet, I > > > > > still don't get anything useful on tail -f /var/log/messages. > > > > > > > > > > Might it be due to the fact that I have to use an adapter (shipped > > > > > with the card, works with Windows)? > > > > > > > > Just to complete the image, this is the output of "umtsmon -v5" > > > > > > > > umtsmon version 0.6 . > > > > set verbosity level to 5 > > > > installing text SIGABRT handler > > > > INFO: '2.6 kernel found' > > > > INFO: 'sysfs found, mounted on /sys' > > > > USB iteration: vendorID/ProductID = 0x413c:a005 > > > > unknown USB Device '(null)' '(null)' > > > > BAD: 'no known USB device found' > > > > INFO: 'pcmcia_core kernel support (yenta) found' > > > > INFO: 'PCMCIA kernel module found - cardctl support possible' > > > > INFO: 'pcmcia browsing available' > > > > INFO: 'Detected NEC-based usb2serial PCMCIA card' > > > > INFO: 'subvendor equals vendor detected. Is there an adapter around > > > > your card?' > > > > INFO: 'Anyway, we think we can handle this one by doing direct USB > > > > analysis.' INFO: 'no serial_cs capable device found' > > > > INFO: 'No Phone Modem found' > > > > INFO: 'Nothing detected yet - let's check for usb2serial in general' > > > > BAD: 'no usbserial ports found that are linked to PCMCIA' > > > > KILLING: 'no USB2Serial found, I'm out of options now...' > > > > *** CRITICAL ERROR: Device detection not successful. > > > > > > > > > > > > *** umtsmon version 0.6 closed due to an unrecoverable program > > > > error. > > > > > > Do does /dev/ttyUSB0 and /dev/ttyUSB1 exist after inserting your Merlin > > > - card? > > > > No, I used diff to compare the "ls -l /dev" output before and a after the > > insertion, there is no difference. > > > > > If they do exist try to start umtsmon with: > > > > > > umtsmon --serial /dev/ttyUSB0 > > > > > > BTW: What color shows your Merlin card after inserting? > > > > White (initializing?), red, flashing red (no PIN) > > Ok. I will try my card with pcmcia - adapter tomorrow.
Good morning... I just tried my Merlin Card with pcmcia adapter. Following Modules are used additional to normal usb modules: Module Size Used by option 11648 0 usbserial 36816 1 option Infos from my logfile: Aug 20 08:01:35 mars usb 6-1: configuration #1 chosen from 1 choice Aug 20 08:01:35 mars usbcore: registered new interface driver usbserial Aug 20 08:01:35 mars USB driver usbserial lacks resume support. Aug 20 08:01:35 mars drivers/usb/serial/usb-serial.c: USB Serial support registe red for generic Aug 20 08:01:35 mars usbcore: registered new interface driver usbserial_generic Aug 20 08:01:35 mars USB driver usbserial_generic lacks resume support. Aug 20 08:01:35 mars drivers/usb/serial/usb-serial.c: USB Serial Driver core Aug 20 08:01:35 mars drivers/usb/serial/usb-serial.c: USB Serial support registe red for GSM modem (1-port) Aug 20 08:01:35 mars option 6-1:1.0: GSM modem (1-port) converter detected Aug 20 08:01:35 mars usb 6-1: GSM modem (1-port) converter now attached to ttyUSB0 Aug 20 08:01:35 mars Device driver ttyUSB0 lacks bus and class support for being resumed. Aug 20 08:01:35 mars option 6-1:1.1: GSM modem (1-port) converter detected Aug 20 08:01:35 mars usb 6-1: GSM modem (1-port) converter now attached to ttyUSB1 Aug 20 08:01:35 mars Device driver ttyUSB1 lacks bus and class support for being resumed. Aug 20 08:01:35 mars usbcore: registered new interface driver option Aug 20 08:01:35 mars USB driver option lacks resume support. Aug 20 08:01:35 mars drivers/usb/serial/option.c: USB Driver for GSM modems: v0.7.1 And also devices /dev/ttyUSB[0|1] exist. So there seems to be no difference between using the express card with or without adapter. -- Michael Gisbers http://www.lugor.de
signature.asc
Description: This is a digitally signed message part.
