On 8/27/07, Willie Wong <[EMAIL PROTECTED]> wrote: > > The following lines worries me a bit. > > On Mon, Aug 27, 2007 at 12:16:23AM -0400, Penguin Lover Lingyun Yang > squawked: > > Starting AP scan (specific SSID) > > Scan SSID - hexdump_ascii(len=6): > > 41 50 54 32 32 42 APT22B > > Trying to get current scan results first without requesting a new scan > to > > speed up initial association > > ioctl[SIOCGIWSCAN]: Resource temporarily unavailable > > Scan results: -1 > > Failed to get scan results > > Failed to get scan results - try scanning again > > Setting scan request: 0 sec 0 usec > > Starting AP scan (broadcast SSID) > > Scan timeout - try to get results > > ioctl[SIOCGIWSCAN]: Resource temporarily unavailable > > Scan results: -1 > > Failed to get scan results > > Failed to get scan results - try scanning again > > The resource temporarily unavailable error is probably not good. > Two things you can try: > 1) Can you even scan the network (without using wpa_supplicant). If > you have wireless-tools installed (you should), after loading the > kernel module, try running 'iwlist eth1 scan', does it produce a > nice list of the cells in your area?
I can scan the network with #iwlist eth1 scanning It gives right list of cells. 2) Is this a WPA problem or a problem on hardware/driver? Can you > connect to other types of networks? Unencrypted? WEP? I think it's WPA, since I can connect to unprotected network. Dmesg output in regards to the bcm43xx driver and possibly softmac > would also be useful. How did you install the 4311 drivers? Try following the directions > here? > > http://forums.gentoo.org/viewtopic-t-409194-postdays-0-postorder-asc-start-0.html > Best of luck, > > W > > -- > Cross Product is an Abomination. > ~Prof. Edward Nelson. MAT 217. P-Town > Sortir en Pantoufles: up 262 days, 14:04 > -- > [EMAIL PROTECTED] mailing list > > Best regards, Lingyun
