I think so - metatiling doesn't make any sense for VTs. I thought it was
automatically disabled...
Dave
On Tue, Jul 18, 2017 at 11:12 AM, Nuno Oliveira <
nuno.olive...@geo-solutions.it> wrote:
> Ah! I didn't think about that. So since meta tiling is enabled by default
> (4x4)
> this means that for using vector tiles with GWC in the best conditions
> meta
> tiling should deactivated (set to 1x1) ?
>
>
> On 07/18/2017 06:13 PM, Dave Blasby wrote:
>
> Hi, Ben,
>
> Metatiling doesn't work with Vector Tiles. Metatiling, basically, has the
> WMS create an image 4* (in both directions) as large and then GWC breaks it
> into 16 smaller images. This helps with labelling.
>
> You cannot (easily) cut up vector tiles, so you cannot do this with vector
> tiles (only with image tiles).
>
> Dave
>
> On Tue, Jul 18, 2017 at 1:02 AM, Ben Jerrim <bjer...@powercor.com.au>
> wrote:
>
>> Had some time to pick this up again today and have found that it's the
>> tile
>> seeding process that's causing me issues, or more accurately the use of
>> metatiling with vector tiles. Once the tiles are seeded with a metatileing
>> factor of 1x1 i get a 100% HIT on the cache as expected using WMTS. If i
>> leave Metatiling at the default 4x4 i get far fewer cached tiles (as
>> expected) and very few HITs to the cache.
>>
>> For example, at zoom 10 with EPSG:900913:
>> Metatile 4x4 - cache seed generates 35 tiles for my layer
>> Metatile 1x1 - cache seed generates 589+ tiles (~35*4*4?)
>>
>> Is this the expected behaviour? Have i missed something (again)? Is this a
>> bug?
>>
>> It's not really an issue for me to run with the 1x1 metatiling but it does
>> slow the seeding process down significantly.
>>
>> Thoughts?
>>
>>
>>
>>
>>
>>
>> --
>> View this message in context: http://osgeo-org.1560.x6.nabbl
>> e.com/Mapbox-vector-tile-cache-tp5327585p5328202.html
>> Sent from the GeoServer - User mailing list archive at Nabble.com.
>>
>> ------------------------------------------------------------
>> ------------------
>> Check out the vibrant tech community on one of the world's most
>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>> _______________________________________________
>> Geoserver-users mailing list
>>
>> Please make sure you read the following two resources before posting to
>> this list:
>> - Earning your support instead of buying it, but Ian Turton:
>> http://www.ianturton.com/talks/foss4g.html#/
>> - The GeoServer user list posting guidelines:
>> http://geoserver.org/comm/userlist-guidelines.html
>>
>> Geoserver-users@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/geoserver-users
>>
>
>
>
> ------------------------------------------------------------------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>
>
>
> _______________________________________________
> Geoserver-users mailing list
>
> Please make sure you read the following two resources before posting to this
> list:
> - Earning your support instead of buying it, but Ian Turton:
> http://www.ianturton.com/talks/foss4g.html#/
> - The GeoServer user list posting guidelines:
> http://geoserver.org/comm/userlist-guidelines.html
> Geoserver-users@lists.sourceforge.nethttps://lists.sourceforge.net/lists/listinfo/geoserver-users
>
>
> --
> Regards,
> Nuno Oliveira
> ==
> GeoServer Professional Services from the experts! Visit http://goo.gl/it488V
> for more information.
> ==
>
> Nuno Miguel Carvalho Oliveira
> @nmcoliveira
> Software Engineer
>
> GeoSolutions S.A.S.
> Via di Montramito 3/A
> 55054 Massarosa (LU)
> Italy
> phone: +39 0584 962313 <+39%200584%20962313>
> fax: +39 0584 1660272 <+39%200584%20166%200272>
> http://www.geo-solutions.ithttp://twitter.com/geosolutions_it
>
> -------------------------------------------------------
> AVVERTENZE AI SENSI DEL D.Lgs. 196/2003
> Le informazioni contenute in questo messaggio di posta elettronica e/o nel/i
> file/s allegato/i sono da considerarsi strettamente riservate. Il loro
> utilizzo è consentito esclusivamente al destinatario del messaggio, per le
> finalità indicate nel messaggio stesso. Qualora riceviate questo messaggio
> senza esserne il destinatario, Vi preghiamo cortesemente di darcene notizia
> via e-mail e di procedere alla distruzione del messaggio stesso,
> cancellandolo dal Vostro sistema. Conservare il messaggio stesso, divulgarlo
> anche in parte, distribuirlo ad altri soggetti, copiarlo, od utilizzarlo per
> finalità diverse, costituisce comportamento contrario ai principi dettati dal
> D.Lgs. 196/2003.
>
> The information in this message and/or attachments, is intended solely for
> the attention and use of the named addressee(s) and may be confidential or
> proprietary in nature or covered by the provisions of privacy act
> (Legislative Decree June, 30 2003, no.196 - Italy's New Data Protection
> Code).Any use not in accord with its purpose, any disclosure, reproduction,
> copying, distribution, or either dissemination, either whole or partial, is
> strictly forbidden except previous formal approval of the named addressee(s).
> If you are not the intended recipient, please contact immediately the sender
> by telephone, fax or e-mail and delete the information in this message that
> has been received in error. The sender does not give any warranty or accept
> liability as the content, accuracy or completeness of sent messages and
> accepts no responsibility for changes made after they were sent or for other
> risks which arise as a result of e-mail transmission, viruses, etc.
>
>
> ------------------------------------------------------------
> ------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> _______________________________________________
> Geoserver-users mailing list
>
> Please make sure you read the following two resources before posting to
> this list:
> - Earning your support instead of buying it, but Ian Turton:
> http://www.ianturton.com/talks/foss4g.html#/
> - The GeoServer user list posting guidelines: http://geoserver.org/comm/
> userlist-guidelines.html
>
> Geoserver-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/geoserver-users
>
>
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Geoserver-users mailing list
Please make sure you read the following two resources before posting to this
list:
- Earning your support instead of buying it, but Ian Turton:
http://www.ianturton.com/talks/foss4g.html#/
- The GeoServer user list posting guidelines:
http://geoserver.org/comm/userlist-guidelines.html
Geoserver-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/geoserver-users
