dexter has uploaded this change for review. (
https://gerrit.osmocom.org/c/docker-playground/+/33571 )
Change subject: MME_Tests: add docker tests for MME
......................................................................
MME_Tests: add docker tests for MME
an MME testsuite exists in osmo-ttcn3-hacks but it is not executed in
docker yet.
Related: OS#5760
Change-Id: Ic1ce1dace47353b0dcf321c923a78567e3ddefb9
---
M debian-bullseye-titan/Dockerfile
A ttcn3-mme-test-ogs/Dockerfile
A ttcn3-mme-test-ogs/Makefile
A ttcn3-mme-test-ogs/jenkins.sh
A ttcn3-mme-test-ogs/ogs/MME_Tests.cfg
A ttcn3-mme-test-ogs/ogs/freediameter.conf
A ttcn3-mme-test-ogs/ogs/mme.sh
A ttcn3-mme-test-ogs/ogs/open5gs-mme.yaml
8 files changed, 919 insertions(+), 0 deletions(-)
git pull ssh://gerrit.osmocom.org:29418/docker-playground
refs/changes/71/33571/1
diff --git a/debian-bullseye-titan/Dockerfile b/debian-bullseye-titan/Dockerfile
index 7bf180f..594acbb 100644
--- a/debian-bullseye-titan/Dockerfile
+++ b/debian-bullseye-titan/Dockerfile
@@ -31,6 +31,7 @@
tcpdump \
vim \
wireshark-common \
+ libgnutls28-dev \
&& \
apt-get clean
diff --git a/ttcn3-mme-test-ogs/Dockerfile b/ttcn3-mme-test-ogs/Dockerfile
new file mode 100644
index 0000000..4d0032d
--- /dev/null
+++ b/ttcn3-mme-test-ogs/Dockerfile
@@ -0,0 +1,13 @@
+ARG REGISTRY
+ARG USER
+FROM $REGISTRY/$USER/debian-bullseye-titan
+ARG OSMO_TTCN3_BRANCH="master"
+
+ADD
https://gerrit.osmocom.org/plugins/gitiles/osmo-ttcn3-hacks/+/$OSMO_TTCN3_BRANCH?format=TEXT
/tmp/commit
+RUN ttcn3-docker-prepare "$OSMO_TTCN3_BRANCH" mme
+
+VOLUME /data
+
+COPY ogs/MME_Tests.cfg /data/MME_Tests.cfg
+
+CMD ttcn3-docker-run mme MME_Tests
diff --git a/ttcn3-mme-test-ogs/Makefile b/ttcn3-mme-test-ogs/Makefile
new file mode 100644
index 0000000..8d0e10b
--- /dev/null
+++ b/ttcn3-mme-test-ogs/Makefile
@@ -0,0 +1 @@
+include ../make/Makefile
diff --git a/ttcn3-mme-test-ogs/jenkins.sh b/ttcn3-mme-test-ogs/jenkins.sh
new file mode 100755
index 0000000..762a2b4
--- /dev/null
+++ b/ttcn3-mme-test-ogs/jenkins.sh
@@ -0,0 +1,48 @@
+#!/bin/sh
+
+. ../jenkins-common.sh
+
+KERNEL_TEST="${KERNEL_TEST:-0}"
+IMAGE_SUFFIX="${IMAGE_SUFFIX:-master}"
+docker_images_require \
+ "open5gs-$IMAGE_SUFFIX" \
+ "ttcn3-mme-test-ogs"
+
+set_clean_up_trap
+set -e
+
+mkdir $VOL_BASE_DIR/mme-tester
+cp ogs/MME_Tests.cfg $VOL_BASE_DIR/mme-tester/
+write_mp_osmo_repo "$VOL_BASE_DIR/mme-tester/MME_Tests.cfg"
+
+mkdir $VOL_BASE_DIR/mme
+cp ogs/open5gs-*.yaml $VOL_BASE_DIR/mme/
+cp ogs/freediameter.conf $VOL_BASE_DIR/mme/
+cp ogs/mme.sh $VOL_BASE_DIR/mme/
+
+network_create
+network_replace_subnet_in_configs
+
+# start container with mme in background
+docker run --cap-add=NET_ADMIN \
+ --device /dev/net/tun:/dev/net/tun \
+ --sysctl net.ipv6.conf.all.disable_ipv6=0 \
+ --rm \
+ --ulimit core=-1 \
+ -v $VOL_BASE_DIR/mme:/data \
+ --name ${BUILD_TAG}-ogs-mme -d \
+ $DOCKER_ARGS \
+ $(docker_network_params $SUBNET 201) \
+ $REPO_USER/open5gs-$IMAGE_SUFFIX \
+ /bin/sh -c "open5gs-mmed -c /data/open5gs-mme.yaml
>/data/open5gs-mmed.out 2>&1"
+
+# start docker container with testsuite in foreground
+docker run --rm \
+ --sysctl net.ipv6.conf.all.disable_ipv6=0 \
+ $(docker_network_params $SUBNET 202) \
+ --ulimit core=-1 \
+ -v $VOL_BASE_DIR/mme-tester:/data \
+ -e "TTCN3_PCAP_PATH=/data" \
+ --name ${BUILD_TAG}-mme-test \
+ $DOCKER_ARGS \
+ $REPO_USER/ttcn3-mme-test-ogs
diff --git a/ttcn3-mme-test-ogs/ogs/MME_Tests.cfg
b/ttcn3-mme-test-ogs/ogs/MME_Tests.cfg
new file mode 100644
index 0000000..59cf865
--- /dev/null
+++ b/ttcn3-mme-test-ogs/ogs/MME_Tests.cfg
@@ -0,0 +1,33 @@
+[ORDERED_INCLUDE]
+# Common configuration, shared between test suites
+"/osmo-ttcn3-hacks/Common.cfg"
+# testsuite specific configuration, not expected to change
+"/osmo-ttcn3-hacks/mme/MME_Tests.default"
+
+# Local configuration below
+
+[LOGGING]
+
+[TESTPORT_PARAMETERS]
+
+[MODULE_PARAMETERS]
+# S1 interface
+mp_mme_ip := "172.18.3.201";
+mp_mme_s1ap_port := 36412;
+mp_s1_local_ip := "172.18.3.202";
+mp_s1_local_port := 50000;
+
+# S6 interface
+mp_s6_local_ip := "172.18.3.202";
+mp_s6_local_port := 3868;
+
+# SGs interface
+mp_sgs_local_ip := "172.18.3.202";
+mp_sgs_local_port := 29118;
+mp_vlr_name := "vlr.example.net";
+mp_mme_name := "mmec01.mmegi0001.mme.epc.mnc070.mcc901.3gppnetwork.org";
+
+[MAIN_CONTROLLER]
+
+[EXECUTE]
+MME_Tests.control
diff --git a/ttcn3-mme-test-ogs/ogs/freediameter.conf
b/ttcn3-mme-test-ogs/ogs/freediameter.conf
new file mode 100644
index 0000000..63d61e5
--- /dev/null
+++ b/ttcn3-mme-test-ogs/ogs/freediameter.conf
@@ -0,0 +1,266 @@
+# This is a sample configuration file for freeDiameter daemon.
+
+# Most of the options can be omitted, as they default to reasonable values.
+# Only TLS-related options must be configured properly in usual setups.
+
+# It is possible to use "include" keyword to import additional files
+# e.g.: include "/etc/freeDiameter.d/*.conf"
+# This is exactly equivalent as copy & paste the content of the included
file(s)
+# where the "include" keyword is found.
+
+
+##############################################################
+## Peer identity and realm
+
+# The Diameter Identity of this daemon.
+# This must be a valid FQDN that resolves to the local host.
+# Default: hostname's FQDN
+#Identity = "aaa.koganei.freediameter.net";
+Identity = "smf.localdomain";
+
+# The Diameter Realm of this daemon.
+# Default: the domain part of Identity (after the first dot).
+#Realm = "koganei.freediameter.net";
+Realm = "localdomain";
+
+##############################################################
+## Transport protocol configuration
+
+# The port this peer is listening on for incoming connections (TCP and SCTP).
+# Default: 3868. Use 0 to disable.
+Port = 3868;
+
+# The port this peer is listening on for incoming TLS-protected connections
(TCP and SCTP).
+# See TLS_old_method for more information about TLS flavours.
+# Note: we use TLS/SCTP instead of DTLS/SCTP at the moment. This will change
in future version of freeDiameter.
+# Default: 5868. Use 0 to disable.
+SecPort = 0;
+
+# Use RFC3588 method for TLS protection, where TLS is negociated after CER/CEA
exchange is completed
+# on the unsecure connection. The alternative is RFC6733 mechanism, where TLS
protects also the
+# CER/CEA exchange on a dedicated secure port.
+# This parameter only affects outgoing connections.
+# The setting can be also defined per-peer (see Peers configuration section).
+# Default: use RFC6733 method with separate port for TLS.
+#TLS_old_method;
+
+# Disable use of TCP protocol (only listen and connect over SCTP)
+# Default : TCP enabled
+#No_TCP;
+
+# Disable use of SCTP protocol (only listen and connect over TCP)
+# Default : SCTP enabled
+#No_SCTP;
+# This option is ignored if freeDiameter is compiled with DISABLE_SCTP option.
+
+# Prefer TCP instead of SCTP for establishing new connections.
+# This setting may be overwritten per peer in peer configuration blocs.
+# Default : SCTP is attempted first.
+#Prefer_TCP;
+
+# Default number of streams per SCTP associations.
+# This setting may be overwritten per peer basis.
+# Default : 30 streams
+#SCTP_streams = 30;
+
+##############################################################
+## Endpoint configuration
+
+# Disable use of IP addresses (only IPv6)
+# Default : IP enabled
+#No_IP;
+
+# Disable use of IPv6 addresses (only IP)
+# Default : IPv6 enabled
+#No_IPv6;
+
+# Specify local addresses the server must bind to
+# Default : listen on all addresses available.
+#ListenOn = "202.249.37.5";
+#ListenOn = "2001:200:903:2::202:1";
+#ListenOn = "fe80::21c:5ff:fe98:7d62%eth0";
+ListenOn = "172.18.3.201";
+
+
+##############################################################
+## Server configuration
+
+# How many Diameter peers are allowed to be connecting at the same time ?
+# This parameter limits the number of incoming connections from the time
+# the connection is accepted until the first CER is received.
+# Default: 5 unidentified clients in paralel.
+#ThreadsPerServer = 5;
+
+##############################################################
+## TLS Configuration
+
+# TLS is managed by the GNUTLS library in the freeDiameter daemon.
+# You may find more information about parameters and special behaviors
+# in the relevant documentation.
+# http://www.gnu.org/software/gnutls/manual/
+
+# Credentials of the local peer
+# The X509 certificate and private key file to use for the local peer.
+# The files must contain PKCS-1 encoded RSA key, in PEM format.
+# (These parameters are passed to gnutls_certificate_set_x509_key_file
function)
+# Default : NO DEFAULT
+#TLS_Cred = "<x509 certif file.PEM>" , "<x509 private key file.PEM>";
+#TLS_Cred = "/etc/ssl/certs/freeDiameter.pem",
"/etc/ssl/private/freeDiameter.key";
+
+# Certificate authority / trust anchors
+# The file containing the list of trusted Certificate Authorities (PEM list)
+# (This parameter is passed to gnutls_certificate_set_x509_trust_file function)
+# The directive can appear several times to specify several files.
+# Default : GNUTLS default behavior
+#TLS_CA = "<file.PEM>";
+
+# Certificate Revocation List file
+# The information about revoked certificates.
+# The file contains a list of trusted CRLs in PEM format. They should have
been verified before.
+# (This parameter is passed to gnutls_certificate_set_x509_crl_file function)
+# Note: openssl CRL format might have interoperability issue with GNUTLS
format.
+# Default : GNUTLS default behavior
+#TLS_CRL = "<file.PEM>";
+
+# GNU TLS Priority string
+# This string allows to configure the behavior of GNUTLS key exchanges
+# algorithms. See gnutls_priority_init function documentation for information.
+# You should also refer to the Diameter required TLS support here:
+# http://tools.ietf.org/html/rfc6733#section-13.1
+# Default : "NORMAL"
+# Example: TLS_Prio = "NONE:+VERS-TLS1.1:+AES-128-CBC:+RSA:+SHA1:+COMP-NULL";
+#TLS_Prio = "NORMAL";
+
+# Diffie-Hellman parameters size
+# Set the number of bits for generated DH parameters
+# Valid value should be 768, 1024, 2048, 3072 or 4096.
+# (This parameter is passed to gnutls_dh_params_generate2 function,
+# it usually should match RSA key size)
+# Default : 1024
+#TLS_DH_Bits = 1024;
+
+# Alternatively, you can specify a file to load the PKCS#3 encoded
+# DH parameters directly from. This accelerates the daemon start
+# but is slightly less secure. If this file is provided, the
+# TLS_DH_Bits parameters has no effect.
+# Default : no default.
+#TLS_DH_File = "<file.PEM>";
+
+
+##############################################################
+## Timers configuration
+
+# The Tc timer of this peer.
+# It is the delay before a new attempt is made to reconnect a disconnected
peer.
+# The value is expressed in seconds. The recommended value is 30 seconds.
+# Default: 30
+#TcTimer = 30;
+
+# The Tw timer of this peer.
+# It is the delay before a watchdog message is sent, as described in RFC 3539.
+# The value is expressed in seconds. The default value is 30 seconds. Value
must
+# be greater or equal to 6 seconds. See details in the RFC.
+# Default: 30
+#TwTimer = 30;
+
+##############################################################
+## Applications configuration
+
+# Disable the relaying of Diameter messages?
+# For messages not handled locally, the default behavior is to forward the
+# message to another peer if any is available, according to the routing
+# algorithms. In addition the "0xffffff" application is advertised in CER/CEA
+# exchanges.
+# Default: Relaying is enabled.
+#NoRelay;
+NoRelay;
+
+# Number of server threads that can handle incoming messages at the same time.
+# Default: 4
+#AppServThreads = 4;
+
+# Other applications are configured by loaded extensions.
+
+##############################################################
+## Extensions configuration
+
+# The freeDiameter framework merely provides support for
+# Diameter Base Protocol. The specific application behaviors,
+# as well as advanced functions, are provided
+# by loadable extensions (plug-ins).
+# These extensions may in addition receive the name of a
+# configuration file, the format of which is extension-specific.
+#
+# Format:
+#LoadExtension = "/path/to/extension" [ : "/optional/configuration/file" ] ;
+#
+# Examples:
+#LoadExtension = "extensions/sample.fdx";
+#LoadExtension = "extensions/sample.fdx":"conf/sample.conf";
+
+# Extensions are named as follow:
+# dict_* for extensions that add content to the dictionary definitions.
+# dbg_* for extensions useful only to retrieve more information on the
framework execution.
+# acl_* : Access control list, to control which peers are allowed to connect.
+# rt_* : routing extensions that impact how messages are forwarded to other
peers.
+# app_* : applications, these extensions usually register callbacks to handle
specific messages.
+# test_* : dummy extensions that are useful only in testing environments.
+
+
+# The dbg_msg_dump.fdx extension allows you to tweak the way freeDiameter
displays some
+# information about some events. This extension does not actually use a
configuration file
+# but receives directly a parameter in the string passed to the extension.
Here are some examples:
+## LoadExtension = "dbg_msg_dumps.fdx" : "0x1111"; # Removes all default
hooks, very quiet even in case of errors.
+## LoadExtension = "dbg_msg_dumps.fdx" : "0x2222"; # Display all events with
few details.
+## LoadExtension = "dbg_msg_dumps.fdx" : "0x0080"; # Dump complete information
about sent and received messages.
+# The four digits respectively control: connections, routing decisions,
sent/received messages, errors.
+# The values for each digit are:
+# 0 - default - keep the default behavior
+# 1 - quiet - remove any specific log
+# 2 - compact - display only a summary of the information
+# 4 - full - display the complete information on a single long line
+# 8 - tree - display the complete information in an easier to read format
spanning several lines.
+
+LoadExtension = "/usr/lib/x86_64-linux-gnu/freeDiameter/dbg_msg_dumps.fdx" :
"0x8888";
+LoadExtension = "/usr/lib/x86_64-linux-gnu/freeDiameter/dict_rfc5777.fdx";
+LoadExtension = "/usr/lib/x86_64-linux-gnu/freeDiameter/dict_mip6i.fdx";
+LoadExtension = "/usr/lib/x86_64-linux-gnu/freeDiameter/dict_nasreq.fdx";
+LoadExtension = "/usr/lib/x86_64-linux-gnu/freeDiameter/dict_nas_mipv6.fdx";
+LoadExtension = "/usr/lib/x86_64-linux-gnu/freeDiameter/dict_dcca.fdx";
+LoadExtension = "/usr/lib/x86_64-linux-gnu/freeDiameter/dict_dcca_3gpp.fdx";
+
+
+##############################################################
+## Peers configuration
+
+# The local server listens for incoming connections. By default,
+# all unknown connecting peers are rejected. Extensions can override this
behavior (e.g., acl_wl).
+#
+# In addition to incoming connections, the local peer can
+# be configured to establish and maintain connections to some
+# Diameter nodes and allow connections from these nodes.
+# This is achieved with the ConnectPeer directive described below.
+#
+# Note that the configured Diameter Identity MUST match
+# the information received inside CEA, or the connection will be aborted.
+#
+# Format:
+#ConnectPeer = "diameterid" [ { parameter1; parameter2; ...} ] ;
+# Parameters that can be specified in the peer's parameter list:
+# No_TCP; No_SCTP; No_IP; No_IPv6; Prefer_TCP; TLS_old_method;
+# No_TLS; # assume transparent security instead of TLS. DTLS is not
supported yet (will change in future versions).
+# Port = 5868; # The port to connect to
+# TcTimer = 30;
+# TwTimer = 30;
+# ConnectTo = "202.249.37.5";
+# ConnectTo = "2001:200:903:2::202:1";
+# TLS_Prio = "NORMAL";
+# Realm = "realm.net"; # Reject the peer if it does not advertise this realm.
+# Examples:
+#ConnectPeer = "aaa.wide.ad.jp";
+#ConnectPeer = "old.diameter.serv" { TcTimer = 60; TLS_old_method; No_SCTP;
Port=3868; } ;
+ConnectPeer = "pcrf.localdomain" { ConnectTo = "172.18.3.202"; Port = 3868;
No_TLS; TcTimer = 2; };
+ConnectPeer = "ocs.localdomain" { ConnectTo = "172.18.3.202"; Port = 3869;
No_TLS; TcTimer = 2; };
+
+
+##############################################################
diff --git a/ttcn3-mme-test-ogs/ogs/mme.sh b/ttcn3-mme-test-ogs/ogs/mme.sh
new file mode 100755
index 0000000..8b1d077
--- /dev/null
+++ b/ttcn3-mme-test-ogs/ogs/mme.sh
@@ -0,0 +1,8 @@
+#!/bin/sh
+set -e
+set -x
+/data/mmed-setup.sh
+mmed_bin="$(command -v open5gs-mmed)"
+# so_bindtodevice cfg requires CAP_NET_RAW:
+setcap cap_net_raw+ep "$mmed_bin"
+su - osmocom -c "$mmed_bin $*"
diff --git a/ttcn3-mme-test-ogs/ogs/open5gs-mme.yaml
b/ttcn3-mme-test-ogs/ogs/open5gs-mme.yaml
new file mode 100644
index 0000000..9aa0e02
--- /dev/null
+++ b/ttcn3-mme-test-ogs/ogs/open5gs-mme.yaml
@@ -0,0 +1,536 @@
+#
+# o Set OGS_LOG_INFO to all domain level
+# - If `level` is omitted, the default level is OGS_LOG_INFO)
+# - If `domain` is omitted, the all domain level is set from 'level'
+# (Default values are used, so no configuration is required)
+#
+# o Set OGS_LOG_ERROR to all domain level
+# - `level` can be set with none, fatal, error, warn, info, debug, trace
+# logger:
+# level: error
+#
+# o Set OGS_LOG_DEBUG to mme/emm domain level
+# logger:
+# level: debug
+# domain: mme,emm
+#
+# o Set OGS_LOG_TRACE to all domain level
+# logger:
+# level: trace
+# domain: core,sbi,ausf,event,tlv,mem,sock
+#
+logger:
+ level: info
+
+#
+# <S1AP Server>>
+#
+# o S1AP Server(all address available)
+# mme:
+# s1ap:
+#
+# o S1AP Server(0.0.0.0:36412)
+# mme:
+# s1ap:
+# addr: 0.0.0.0
+#
+# o S1AP Server(127.0.0.2:36412, [::1]:36412)
+# mme:
+# s1ap:
+# - addr: 127.0.0.2
+# - addr: ::1
+#
+# o S1AP Server(different port)
+# mme:
+# s1ap:
+# - addr: 127.0.0.2
+# port: 36413
+#
+# o S1AP Server(address available in `eth0` interface)
+# mme:
+# s1ap:
+# dev: eth0
+#
+# o S1AP Option (Default)
+# - sctp_nodelay : true
+# - so_linger.l_onoff : false
+#
+# mme:
+# s1ap:
+# addr: 127.0.0.2
+# option:
+# stcp_nodelay: false
+# so_linger:
+# l_onoff: true
+# l_linger: 10
+#
+# o S1AP SCTP Option (Default)
+# - spp_hbinterval : 5000 (5secs)
+# - spp_sackdelay : 200 (200ms)
+# - srto_initial : 3000 (3secs)
+# - srto_min : 1000 (1sec)
+# - srto_max : 5000 (5secs)
+# - sinit_num_ostreams : 30
+# - sinit_max_instreams : 65535
+# - sinit_max_attempts : 4
+# - sinit_max_init_timeo : 8000(8secs)
+#
+# mme:
+# s1ap:
+# addr: 127.0.0.2
+# option:
+# sctp:
+# spp_hbinterval : 5000
+# spp_sackdelay : 200
+# srto_initial : 3000
+# srto_min : 1000
+# srto_max : 5000
+# sinit_num_ostreams : 30
+# sinit_max_instreams : 65535
+# sinit_max_attempts : 4
+# sinit_max_init_timeo : 8000
+#
+# <GTP-C Server>>
+#
+# o GTP-C Server(all address available)
+# mme:
+# gtpc:
+#
+# o GTP-C Server(127.0.0.2:2123, [::1]:2123)
+# mme:
+# gtpc:
+# - addr: 127.0.0.2
+# - addr: ::1
+#
+# <SGsAP>
+#
+# o Single MSC/VLR(127.0.0.2)
+# mme:
+# sgsap:
+# addr: 127.0.0.2
+# map:
+# tai:
+# plmn_id:
+# mcc: 001
+# mnc: 01
+# tac: 4130
+# lai:
+# plmn_id:
+# mcc: 001
+# mnc: 01
+# lac: 43690
+# map:
+# tai:
+# plmn_id:
+# mcc: 002
+# mnc: 02
+# tac: 4132
+# lai:
+# plmn_id:
+# mcc: 002
+# mnc: 02
+# lac: 43692
+#
+# o Multiple MSC/VLR
+# mme:
+# sgsap:
+# - addr: 127.0.0.2
+# port: 29119
+# map:
+# tai:
+# plmn_id:
+# mcc: 001
+# mnc: 01
+# tac: 4131
+# lai:
+# plmn_id:
+# mcc: 001
+# mnc: 01
+# lac: 43691
+# map:
+# tai:
+# plmn_id:
+# mcc: 002
+# mnc: 02
+# tac: 4132
+# lai:
+# plmn_id:
+# mcc: 002
+# mnc: 02
+# lac: 43692
+# - addr
+# - 127.0.0.4
+# - fd69:f21d:873c:fa::2
+# map:
+# tai:
+# plmn_id:
+# mcc: 001
+# mnc: 01
+# tac: 4132
+# lai:
+# plmn_id:
+# mcc: 002
+# mnc: 02
+# lac: 43692
+# - name: msc.open5gs.org
+# map:
+# tai:
+# plmn_id:
+# mcc: 001
+# mnc: 01
+# tac: 4133
+# lai:
+# plmn_id:
+# mcc: 002
+# mnc: 02
+# lac: 43693
+#
+# <Metrics Server>
+#
+# o Metrics Server(http://<any address>:9090)
+# mme:
+# metrics:
+# - addr: 0.0.0.0
+# port: 9090
+#
+# <GUMMEI>
+#
+# o Multiple GUMMEI
+# mme:
+# gummei:
+# - plmn_id:
+# mcc: 001
+# mnc: 01
+# mme_gid: 2
+# mme_code: 1
+# - plmn_id:
+# - mcc: 002
+# mnc: 02
+# - mcc: 003
+# mnc: 03
+# mme_gid: [3, 4]
+# mme_code:
+# - 2
+# - 3
+#
+#
+# <TAI>
+#
+# o Multiple TAI
+#
+# When multiple TAIs are configured as shown below,
+# the Served TAI is determined by comparing UserLocationInformation
+# of UplinkNASTransport sent from eNB.
+#
+# For example, if the eNB sends TAC with 30 to the MME,
+# the fourth TAI (TAC: 20, 28, 29-32, 36-38, 40-42, 50, 60, 70, 70)
+# is determined as the Served TAI. The result is transmitted to the eNB
+# as a Tracking Area identity List in Registration Accept.
+#
+# mme:
+# tai:
+# - plmn_id:
+# mcc: 001
+# mnc: 01
+# tac: [1, 3, 5]
+# tai:
+# - plmn_id:
+# mcc: 002
+# mnc: 02
+# tac: [6-10, 15-18]
+# tai:
+# - plmn_id:
+# mcc: 003
+# mnc: 03
+# tac: 20
+# - plmn_id:
+# mcc: 004
+# mnc: 04
+# tac: 21
+# tai:
+# - plmn_id:
+# mcc: 005
+# mnc: 05
+# tac: [22, 28]
+# - plmn_id:
+# mcc: 006
+# mnc: 06
+# tac: [30-32, 34, 36-38, 40-42, 44, 46, 48]
+# - plmn_id:
+# mcc: 007
+# mnc: 07
+# tac: 50
+# - plmn_id:
+# mcc: 008
+# mnc: 08
+# tac: 60
+# - plmn_id:
+# mcc: 009
+# mnc: 09
+# tac: [70, 80]
+#
+#
+# <Access Control>
+#
+# If access_control is not specified, then all networks are allowed
+# If access_control is defined,
+# no other networks are allowed other than matching plmn_id.
+#
+# default_reject_cause may be used to overwrite the default error cause #11
+# for non matching plmn_id
+#
+# for matching plmn_id with reject_cause defined,
+# the MME rejects access with the reject_cause error cause
+#
+# for matching plmn_id without reject_cause defined,
+# the MME accepts the PLMN traffic
+#
+# o The example below only accepts 002/02 and 999/70 PLMNs.
+# 001/01 is rejected with cause 15,
+# and the rest of the PLMNs are rejected with default cause 13.
+#
+# mme:
+# access_control:
+# - default_reject_cause: 13
+# - plmn_id:
+# reject_cause: 15
+# mcc: 001
+# mnc: 01
+# - plmn_id:
+# mcc: 002
+# mnc: 02
+# - plmn_id:
+# mcc: 999
+# mnc: 70
+#
+#
+# <Network Name>
+# mme:
+# network_name:
+# full: Open5GS
+# short: Next
+#
+# <MME Name>
+# mme:
+# mme_name: open5gs-mme0
+#
+# <Relative Capacity> - Default(255)
+# mme:
+# relative_capacity: 100
+#
+mme:
+ freeDiameter: /data/freediameter.conf
+ s1ap:
+ - addr: 172.18.3.201
+ gtpc:
+ - addr: 172.18.3.201
+ metrics:
+ - addr: 172.18.3.201
+ port: 9090
+ gummei:
+ plmn_id:
+ mcc: 999
+ mnc: 70
+ mme_gid: 2
+ mme_code: 1
+ tai:
+ plmn_id:
+ mcc: 999
+ mnc: 70
+ tac: 1
+ security:
+ integrity_order : [ EIA2, EIA1, EIA0 ]
+ ciphering_order : [ EEA0, EEA1, EEA2 ]
+ network_name:
+ full: Open5GS
+ mme_name: open5gs-mme0
+
+#
+# <GTP-C Client>
+#
+# o Specify SGW addresses the GTP-C must connect to
+#
+# o One SGW is defined.
+# If prefer_ipv4 is not true, [fd69:f21d:873c:fa::2] is selected.
+# sgwc:
+# gtpc:
+# addr:
+# - 127.0.0.3
+# - fd69:f21d:873c:fa::2
+#
+# o Two SGW are defined. MME selects SGW with round-robin manner per UE
+# sgwc:
+# gtpc:
+# - addr: 127.0.0.3
+# - addr: fd69:f21d:873c:fa::2
+#
+# o Three SGW are defined. MME selects SGW with round-robin manner per UE
+# sgwc:
+# gtpc:
+# - addr
+# - 127.0.0.3
+# - fd69:f21d:873c:fa::2
+# - addr
+# - 127.0.0.22
+# - fd69:f21d:873c:fa::12
+# - name: sgw3.open5gs.org
+#
+# <SGW Selection Mode>
+#
+# o Round-Robin
+# sgwc:
+# gtpc:
+# addr: 127.0.0.3
+# addr: 127.0.2.2
+# addr: 127.0.4.2
+#
+# o SGW selection by eNodeB TAC
+# (either single TAC or multiple TACs, DECIMAL representation)
+#
+# sgwc:
+# gtpc:
+# - addr: 127.0.0.3
+# tac: 26000
+# - addr: 127.0.2.2
+# tac: [25000, 27000, 28000]
+#
+# o SGW selection by e_cell_id(28bit)
+# (either single or multiple e_cell_id, HEX representation)
+#
+# sgwc:
+# gtpc:
+# - addr: 127.0.0.3
+# e_cell_id: abcde01
+# - addr: 127.0.2.2
+# e_cell_id: [12345, a9413, 98765]
+#
+sgwc:
+ gtpc:
+ - addr: 172.18.3.202
+
+#
+# smf:
+#
+# <GTP-C Client>
+#
+# o By default, the SMF uses the first SMF node.
+# - To use a different APN for each SMF, specify gtpc.apn as the APN name.
+# - If the HSS uses WebUI to set the SMF IP for each UE,
+# you can use a specific SMF node for each UE.
+# (Default values are used, so no configuration is required)
+#
+# o Two SMF are defined. 127.0.0.4:2123 is used.
+# [fd69:f21d:873c:fa::3]:2123 is ignored.
+# smf:
+# gtpc:
+# - addr: 127.0.0.4
+# - addr: fd69:f21d:873c:fa::3
+#
+# o One SMF is defined. if prefer_ipv4 is not true,
+# [fd69:f21d:873c:fa::3] is selected.
+# smf:
+# gtpc:
+# - addr:
+# - 127.0.0.4
+# - fd69:f21d:873c:fa::3
+#
+# o Two SMF are defined with a different APN.
+# - Note that if SMF IP for UE is configured in HSS,
+# the following configurion for this UE is ignored.
+# smf:
+# gtpc:
+# - addr: 127.0.0.4
+# apn: internet
+# - addr: 127.0.0.5
+# apn: volte
+#
+# o If APN is omitted, the default APN uses the first SMF node.
+# smf:
+# gtpc:
+# - addr: 127.0.0.4
+# - addr: 127.0.0.5
+# apn: volte
+#
+# o SMF selection by eNodeB TAC
+# (either single TAC or multiple TACs, DECIMAL representation)
+#
+# gtpc:
+# - addr: 127.0.0.4
+# tac: 26000
+# - addr: 127.0.2.4
+# tac: [25000, 27000, 28000]
+#
+# o SMF selection by e_cell_id(28bit)
+# (either single or multiple e_cell_id, HEX representation)
+#
+# gtpc:
+# - addr: 127.0.0.4
+# e_cell_id: abcde01
+# - addr: 127.0.2.4
+# e_cell_id: [12345, a9413, 98765]
+smf:
+ gtpc:
+ - addr:
+ - 172.18.3.201
+ - ::1
+
+#
+# o Disable use of IPv4 addresses (only IPv6)
+# parameter:
+# no_ipv4: true
+#
+# o Disable use of IPv6 addresses (only IPv4)
+# parameter:
+# no_ipv6: true
+#
+# o Prefer IPv4 instead of IPv6 for estabishing new GTP connections.
+# parameter:
+# prefer_ipv4: true
+#
+parameter:
+
+#
+# o Maximum Number of UE
+# max:
+# ue: 1024
+#
+# o Maximum Number of Peer(S1AP/NGAP, DIAMETER, GTP, PFCP or SBI)
+# max:
+# peer: 64
+#
+max:
+
+#
+# usrsctp:
+# udp_port : 9899
+#
+usrsctp:
+
+#
+# o Message Wait Duration (Default : 10,000 ms = 10 seconds)
+# (Default values are used, so no configuration is required)
+#
+# o Message Wait Duration (3000 ms)
+# time:
+# message:
+# duration: 3000
+#
+# o Handover Wait Duration (Default : 300 ms)
+# Time to wait for MME to send UEContextReleaseCommand
+# to the source eNB after receiving HandoverNotify
+# (Default values are used, so no configuration is required)
+#
+# o Handover Wait Duration (500ms)
+# time:
+# handover:
+# duration: 500
+#
+# o Timers of EPS mobility/session management
+# time:
+# t3402:
+# value: 720 # 12 minutes * 60 = 720 seconds
+# t3412:
+# value: 3240 # 54 minutes * 60 = 3240 seconds
+# t3423:
+# value: 720 # 12 minutes * 60 = 720 seconds
+time:
--
To view, visit https://gerrit.osmocom.org/c/docker-playground/+/33571
To unsubscribe, or for help writing mail filters, visit
https://gerrit.osmocom.org/settings
Gerrit-Project: docker-playground
Gerrit-Branch: master
Gerrit-Change-Id: Ic1ce1dace47353b0dcf321c923a78567e3ddefb9
Gerrit-Change-Number: 33571
Gerrit-PatchSet: 1
Gerrit-Owner: dexter <[email protected]>
Gerrit-MessageType: newchange
