Hi again !
> > Fixed. kgicon.o compiles and gets inserted. Ah, graphical console at
> > 640x480 !!
> Ah - good.
Great !
Okay - I think I'm on the right track now.
I changed the SYNC_...-flags in my kgicon.mon from SYNC_NORMAL to
SYNC_SEPARATE | SYNC_COMPOSITE | SYNC_MULTISYNC and copied the timings
from sample.timelist.
Now I can switch to other graphic modes (e.g. fbset -g 1024 768 1024 768
16).
But:
1) The picture starts in the middle of the screen
2) Only console one is readable at all
(e.g. I can see two blinking cursors on console two and a big mess on
console three)
3) Again those mysterious errors
"mtrr: base(0xe6000000) is not aligned on a size(0xfe0000) boundary"
(by the way that message was reported by at least one other user in
the past)
4) I can switch to 800x600x16 but not back to 640x480x8. (=> Reboot,
grrrrr)
Do I have to calculate my own timings ? How can I do it ?
> > 5) Is there a way to remove the kgicon-module ????
> No. Unfortunately not.
Is it absolutely impossible to implement ?
> > However I moved on and built and installed libgii. Next configure
> > libggi:
> > 7) I can't set the include-path of libgii. The configure-script
seems to
> > insist on the include-files to reside in /usr/include/ggi but libgii
> > copies them to
> > /usr/local/include/ggi.
> This is strange - it works for me. However you can use
> ./configure --with-gii=DIR to force it to /usr/local/.
Done. I thought I tried before but obviously I forgot to remove
config.cache
after ./configure without that option failed :-)
> > Any ideas how I can run ggi at higher resolutions ?
> Your first idea was right - contact me if the problem persists - we'll
need
> some tracing, then. Also try, if the demos can switch to higher
resolutions.
demos/cube3d
LibGGI: Failed to set mode: 640x480.V640x480.F2.D1x1 [P8/8]
demos/pageflip
LibGGI: Failed to set mode: F2.[]
cannot set mode!
To be continued.
Martin.
_____________________________________
P.S.: Silence about LibGGIGL / XGGI ?
