Jason - Thanks for the report; this is indeed a regression, that I just fixed in SVN r22568.
Christophe > On 03 Feb 2016, at 16:00, Jason C <[email protected]> wrote: > > It appears to be a regression of some sort. There is more info on the > previously linked git issue thread. > > The author there states that it works with gmsh 2.9.3 and getdp 2.5.1 and was > able to reproduce the issue with the newest versions of the tools. > > Jason > > On Feb 2, 2016 2:00 PM, "Jason C" <[email protected]> wrote: > Using: > > - gmsh 2.11.0 (both 32 and 64 bit attempted) > - getdp 2.7.0 (both 32 and 64 bit attempted) > - Windows 7 64-bit, 4GB RAM > - The attached .pro file (source: https://github.com/Steve-OH/lap_water) > > When I do the following (this is a fresh install, first time running this > software): > > 1. Start gmsh. > 2. Load the .pro file. > 3. Select cutX, Y, and Z in GetDP -> Post-Processing > 4. Press Run, select path to getdp, accept. > > Gmsh runs for about 2-3 seconds then silently exits (verified gmsh.exe > terminated immediately with task manager). The last message printed to the > terminal (I set message verbosity to "100" arbitrarily) is: > > ANN: ERROR------->Requesting more near neighbors than data > points<-------------ERROR > > Partial debug log is attached and also pasted below. > > How should I proceed? > > I have also posted this at https://github.com/Steve-OH/lap_water/issues/1 in > case it is an issue with the author's .pro file rather than gmsh. > > Thanks, > Jason > > === LOG === > > Debug : openglWindow::draw() > Debug : Mesh has changed: reinitializing vertex arrays > Debug : openglWindow::draw() > Info : ------------------------------------------------------- > Info : Gmsh version : 2.11.0 > Info : Build OS : Windows > Info : Build options : Ann Bamg Bfgs Blas Blossom Chaco DIntegration Fltk > Gmm Jpeg(Fltk) Kbipack Lapack MathEx Med Mesh Metis Mmg3d Mpeg > NativeFileChooser Netgen NoSocklenT ONELAB ONELABMetamodel OpenCascade OpenGL > OptHom PETSc Parser Plugins Png(Fltk) Post SLEPc Salome Solver Tetgen(1.5) > Voro3D Zlib(Fltk) > Info : Build date : 20151107 > Info : Build host : christop-e38ece > Info : Packager : Administrator > Info : Executable : C:\Programs\woodemc\gmsh-2.11.0-Windows\gmsh.exe > Info : Home directory : C:\Users\Jason\AppData\Roaming/ > Info : Launch date : Tue Feb 02 13:51:13 2016 > Info : Command line : gmsh > Info : ------------------------------------------------------- > Debug : Deleting onelabGroup widgets (108) > Debug : Deleting onelabGroup widgets (108) > > ... > > Debug : Mesh has changed: reinitializing vertex arrays > Info : Calling '"C:\Programs\woodemc\getdp-2.7.0-Windows\getdp.exe" > "C:\Programs\woodemc\lap_water-master\models\oa > k_hole.pro" -onelab "GetDP" 127.0.0.1:57610' > Info : Running 'GetDP'... > Info : GetDP - Performing ONELAB 'check' > Info : GetDP - Running 'C:\Programs\woodemc\getdp-2.7.0-Windows\getdp.exe > C:\Programs\woodemc\lap_water-master\models > \oak_hole.pro -onelab GetDP 127.0.0.1:57610' [GetDP 2.7.0, 1 node] > Info : GetDP - Started (Tue Feb 02 13:53:12 2016, Wall = 0.031s, CPU = > 0.0468003s, Mem = 8.73047Mb) > Info : GetDP - Got mesh name from Onelab: > 'C:\Programs\woodemc\lap_water-master\models\oak_hole.msh' > Info : GetDP - Initializing Gmsh > Info : GetDP - Loading problem definition > 'C:\Programs\woodemc\lap_water-master\models\oak_hole.pro' > Info : GetDP - Loading problem definition > 'C:\Programs\woodemc\lap_water-master\models\diffusion.pro' > Info : GetDP - Available Resolutions > Info : GetDP - (1) LinearAdaptive > Info : GetDP - Available PostOperations > Info : GetDP - (1) cutX > Info : GetDP - (2) cutY > Info : GetDP - (3) cutZ > Info : GetDP - Stopped (Tue Feb 02 13:53:12 2016, Wall = 0.156s, CPU = > 0.0468003s, Mem = 9.94922Mb) > Info : Done running 'GetDP' > Info : Done > Info : Reading > 'C:\Programs\woodemc\lap_water-master\models\oak_hole.geo'... > Debug : Surface: 301 > Debug : SVD : 243.853,45.7905,0 (min=2) > Debug : Plane : (0 x + 0 y + 1 z = 0) > Debug : Normal : (0 , 0 , 1 ) > Debug : t1 : (0 , 1 , 0 ) > Debug : t2 : (1 , 0 , 0 ) > Debug : pt : (0 , 0 , 0 ) > Debug : Surface: 302 > Debug : SVD : 243.853,45.7905,0 (min=2) > Debug : Plane : (0 x + 0 y + 1 z = 15.24) > Debug : Normal : (0 , 0 , 1 ) > Debug : t1 : (0 , 1 , 0 ) > Debug : t2 : (1 , 0 , 0 ) > Debug : pt : (0 , 0 , 15.24 ) > Debug : Surface: 303 > Debug : SVD : 243.84,15.24,0 (min=2) > Debug : Plane : (1 x + 0 y + 0 z = 0) > Debug : Normal : (1 , 0 , 0 ) > Debug : t1 : (0 , 0 , 1 ) > Debug : t2 : (0 , 1 , 0 ) > Debug : pt : (0 , 0 , 0 ) > Debug : Surface: 304 > Debug : SVD : 45.72,15.24,0 (min=2) > Debug : Plane : (-0 x + -1 y + -0 z = -243.84) > Debug : Normal : (-0 , -1 , -0 ) > Debug : t1 : (0 , 0 , 1 ) > Debug : t2 : (1 , 0 , 0 ) > Debug : pt : (0 , 243.84 , 0 ) > Debug : Surface: 305 > Debug : SVD : 243.84,15.24,-0 (min=2) > Debug : Plane : (1 x + 0 y + 0 z = 45.72) > Debug : Normal : (1 , 0 , 0 ) > Debug : t1 : (0 , 0 , 1 ) > Debug : t2 : (0 , 1 , 0 ) > Debug : pt : (45.72 , 0 , 0 ) > Debug : Surface: 306 > Debug : SVD : 45.72,15.24,0 (min=2) > Debug : Plane : (-0 x + -1 y + -0 z = -0) > Debug : Normal : (-0 , -1 , -0 ) > Debug : t1 : (0 , 0 , 1 ) > Debug : t2 : (1 , 0 , 0 ) > Debug : pt : (0 , 0 , 0 ) > Debug : Surface: 307 > Debug : SVD : 15.24,2.54,0 (min=2) > Debug : Plane : (1 x + 0 y + 0 z = 21.59) > Debug : Normal : (1 , 0 , 0 ) > Debug : t1 : (0 , 0 , 1 ) > Debug : t2 : (0 , 1 , 0 ) > Debug : pt : (21.59 , 0 , 0 ) > Debug : Surface: 308 > Debug : SVD : 15.24,2.54,0 (min=2) > Debug : Plane : (-0 x + -1 y + -0 z = -123.19) > Debug : Normal : (-0 , -1 , -0 ) > Debug : t1 : (0 , 0 , 1 ) > Debug : t2 : (1 , 0 , 0 ) > Debug : pt : (0 , 123.19 , 0 ) > Debug : Surface: 309 > Debug : SVD : 15.24,2.54,-0 (min=2) > Debug : Plane : (1 x + 0 y + 0 z = 24.13) > Debug : Normal : (1 , 0 , 0 ) > Debug : t1 : (0 , 0 , 1 ) > Debug : t2 : (0 , 1 , 0 ) > Debug : pt : (24.13 , 0 , 0 ) > Debug : Surface: 310 > Debug : SVD : 15.24,2.54,0 (min=2) > Debug : Plane : (-0 x + -1 y + -0 z = -120.65) > Debug : Normal : (-0 , -1 , -0 ) > Debug : t1 : (0 , 0 , 1 ) > Debug : t2 : (1 , 0 , 0 ) > Debug : pt : (0 , 120.65 , 0 ) > Debug : Gmsh model (GModel) imported: > Debug : 24 Vertices > Debug : 28 Edges > Debug : 10 Faces > Debug : 1 Regions > Info : Done reading > 'C:\Programs\woodemc\lap_water-master\models\oak_hole.geo' > Info : Meshing 1D... > Info : Meshing curve 101 (Line) > ANN: ERROR------->Requesting more near neighbors than data > points<-------------ERROR > > _______________________________________________ > gmsh mailing list > [email protected] > http://onelab.info/mailman/listinfo/gmsh -- Prof. Christophe Geuzaine University of Liege, Electrical Engineering and Computer Science http://www.montefiore.ulg.ac.be/~geuzaine Tetrahedron V, July 4-5 2016: http://tetrahedron.montefiore.ulg.ac.be Free software: http://gmsh.info | http://getdp.info | http://onelab.info _______________________________________________ gmsh mailing list [email protected] http://onelab.info/mailman/listinfo/gmsh
