Dear all, still didn't have any luck in meshing the STL with prismatic sublayer.. Either the tetrahedra mesh directly connects to the wing surface rather than to the prisms, or the tetrahedra are not generated at all due to intersection issues. Maybe someone has another hint on how to modify Ruths file to make it work.. Thanks a lot in advance, kind regards,
Johannes 2016-04-02 2:35 GMT+02:00 Johannes Dillinger <[email protected]>: > Dear Ruth, > > intermdeiate result: > I tried changing line 54 from > > slbndwing=newsl; Surface Loop(newsl) = 1; > > to > > slbndwing=newsl; Surface Loop(newsl) = num[0]; > > but then a lot of warnings occur and no tetrahedra mesh outside the > boundary layer is generated.. As I understand, num[0] is the outer surface > of the boundary layer.. > > Maybe you have another idea..:) > Kind regards, > > Johannes > > > > > > > > 2016-04-01 19:15 GMT+02:00 Johannes Dillinger <[email protected]>: > >> Dear Ruth, >> thanks a lot for the modification! There is is just one problem left, the >> tetrahedra mesh does not connect to the outer surface of the prism >> sublayer, but directly to the wing surface; the meshes intersect (see >> picture attached). >> I got a similar result with Delauney-3D-meshing. >> Do you have a hint on how to solve this? >> Thank you so much again!! >> Kind regards, >> Johannes >> >> >> >> >> 2016-04-01 11:59 GMT+02:00 Ruth Vazquez Sabariego < >> [email protected]>: >> >>> Hope the attached patched version of your file, does what you want. >>> There was a small problem with the surface loops. >>> >>> Regards, >>> Ruth >>> >>> >>> >> >
_______________________________________________ gmsh mailing list [email protected] http://onelab.info/mailman/listinfo/gmsh
