Hi Christoph, Ruth, thank you very much for your help, working now! What a great support:-) Kind regards,
Johannes 2016-04-05 23:19 GMT+02:00 Christophe Geuzaine <[email protected]>: > > Hi Johannes - Here's the corrected file. > > > > > > On 05 Apr 2016, at 09:50, Johannes Dillinger <[email protected]> > wrote: > > > > Dear all, > > > > still didn't have any luck in meshing the STL with prismatic sublayer.. > > Either the tetrahedra mesh directly connects to the wing surface rather > than to the prisms, or the tetrahedra are not generated at all due to > intersection issues. > > Maybe someone has another hint on how to modify Ruths file to make it > work.. > > Thanks a lot in advance, kind regards, > > > > Johannes > > > > > > > > > > 2016-04-02 2:35 GMT+02:00 Johannes Dillinger <[email protected]>: > > Dear Ruth, > > > > intermdeiate result: > > I tried changing line 54 from > > > > slbndwing=newsl; Surface Loop(newsl) = 1; > > > > to > > > > slbndwing=newsl; Surface Loop(newsl) = num[0]; > > > > but then a lot of warnings occur and no tetrahedra mesh outside the > boundary layer is generated.. As I understand, num[0] is the outer surface > of the boundary layer.. > > > > Maybe you have another idea..:) > > Kind regards, > > > > Johannes > > > > > > > > > > > > > > > > 2016-04-01 19:15 GMT+02:00 Johannes Dillinger <[email protected]>: > > Dear Ruth, > > thanks a lot for the modification! There is is just one problem left, > the tetrahedra mesh does not connect to the outer surface of the prism > sublayer, but directly to the wing surface; the meshes intersect (see > picture attached). > > I got a similar result with Delauney-3D-meshing. > > Do you have a hint on how to solve this? > > Thank you so much again!! > > Kind regards, > > Johannes > > > > > > > > > > 2016-04-01 11:59 GMT+02:00 Ruth Vazquez Sabariego < > [email protected]>: > > Hope the attached patched version of your file, does what you want. > > There was a small problem with the surface loops. > > > > Regards, > > Ruth > > > > > > > > > > > > _______________________________________________ > > gmsh mailing list > > [email protected] > > http://onelab.info/mailman/listinfo/gmsh > > -- > Prof. Christophe Geuzaine > University of Liege, Electrical Engineering and Computer Science > http://www.montefiore.ulg.ac.be/~geuzaine > > Tetrahedron V, July 4-5 2016: http://tetrahedron.montefiore.ulg.ac.be > Free software: http://gmsh.info | http://getdp.info | http://onelab.info > > >
_______________________________________________ gmsh mailing list [email protected] http://onelab.info/mailman/listinfo/gmsh
