Hello,
I got the same error but changing the 3D mesh algorithm with frontal solved the
issue. I suggest you read the mesh section in the documentation as valuable
infos are given.
Regards,Fabrice.
De : Massimiliano Martinelli <[email protected]>
À : [email protected]
Envoyé le : Jeudi 9 février 2017 12h03
Objet : [Gmsh] error message "a tet is not connected by a boundary face"
Good morning,
I have a problem using GMsh.
I would like to generate a 3D mesh for the simple gemoetry defined by
the attached script.
The 1D and 2D mesh generation are ok but running the 3D mesh generation
I obtain the following messages:
"a tet is not connected by a boundary face".
Am I doing something wrong?
PS: I'm using GMsh 2.16 with GUI on MacOSX and I have not changed the
default settings.
Thank you very much,
Massimiliano Martinelli
--
Massimiliano Martinelli
IMATI "E.Magenes" - CNR
via Ferrata 5, 27100 Pavia
(+39) 0382 548234
_______________________________________________
gmsh mailing list
[email protected]
http://onelab.info/mailman/listinfo/gmsh
_______________________________________________
gmsh mailing list
[email protected]
http://onelab.info/mailman/listinfo/gmsh
