Thank you very much! MM
On 02/09/17 22:30, Fabrice Pepin wrote: > Hello, > > I got the same error but changing the 3D mesh algorithm with frontal > solved the issue. I suggest you read the mesh section in the > documentation as valuable infos are given. > > Regards, > Fabrice. > > > ------------------------------------------------------------------------ > *De :* Massimiliano Martinelli <[email protected]> > *À :* [email protected] > *Envoyé le :* Jeudi 9 février 2017 12h03 > *Objet :* [Gmsh] error message "a tet is not connected by a boundary face" > > > Good morning, > > I have a problem using GMsh. > > I would like to generate a 3D mesh for the simple gemoetry defined by > the attached script. > The 1D and 2D mesh generation are ok but running the 3D mesh generation > I obtain the following messages: > "a tet is not connected by a boundary face". > > Am I doing something wrong? > > PS: I'm using GMsh 2.16 with GUI on MacOSX and I have not changed the > default settings. > > Thank you very much, > Massimiliano Martinelli > > > -- > Massimiliano Martinelli > IMATI "E.Magenes" - CNR > via Ferrata 5, 27100 Pavia > (+39) 0382 548234 > > _______________________________________________ > gmsh mailing list > [email protected] <mailto:[email protected]> > http://onelab.info/mailman/listinfo/gmsh > > -- Massimiliano Martinelli, PhD. IMATI-CNR "E.Magenes" Pavia [email protected] +39 0382 548234
_______________________________________________ gmsh mailing list [email protected] http://onelab.info/mailman/listinfo/gmsh
