I have tried to export a mesh (with physical entities defined included volume) both checking or not the "save all" option. It is one mesh with 57111 tetrahedra, 10553 nodes, 4946 boundary faces and 116695 internal faces. However, the two mesh files differ only by 5306 lines, so these cannot be the connectivity of internal faces....
-----Messaggio originale----- Da: Jeremy Theler [mailto:[email protected]] Inviato: giovedì 29 giugno 2017 12:28 A: Alessandro Vicini; [email protected] Oggetto: Re: R: R: [Gmsh] Gmsh .msh file 1. not if you also define physical volumes (can anyone else help me explain this?) 2. right On Thu, 2017-06-29 at 10:23 +0000, Alessandro Vicini wrote: > But if I get it right: > > 1) if I define physical entities and export the mesh without checking > "save all" I will not have internal faces; > 2) if I check "save all" I loose the physical entities definition. > > > > -----Messaggio originale----- > Da: Jeremy Theler [mailto:[email protected]] > Inviato: giovedì 29 giugno 2017 11:53 > A: Alessandro Vicini; [email protected] > Oggetto: Re: R: [Gmsh] Gmsh .msh file > > define one (or more) physical volumes > > > On Thu, 2017-06-29 at 09:22 +0000, Alessandro Vicini wrote: > > Yes, the problem is that I would like to have physical entities > > defined, but also the connectivity of all internal faces (possibly > > without duplications...). > > > > A. > > > > > > -----Messaggio originale----- > > Da: gmsh [mailto:[email protected]] Per conto > > di Jeremy Theler > > Inviato: giovedì 29 giugno 2017 11:17 > > A: [email protected] > > Oggetto: Re: [Gmsh] Gmsh .msh file > > > > See > > > > http://gmsh.info/doc/texinfo/gmsh.html#Elementary-vs-physical-entit > > ie > > s > > > > As much as I would like to say RTFM, I have to say that this has > > happened to me when I started using gmsh and I believe it happened > > to many other users. > > > > I wonder if there exist a more intuitive way of dealing the > > Mesh.SaveAll option. > > > > -- > > jeremy > > www.seamplex.com > > > > > > On Thu, 2017-06-29 at 08:46 +0000, Alessandro Vicini wrote: > > > Hullo, > > > > > > the elements which are printed out in the msh file are the > > > boundary faces and the tetrahedral. > > > Is there some way to have also the connectivity of all internal > > > faces? > > > Thank you. > > > > > > Alessandro > > > > > > > > > > > > _______________________________________________ > > > gmsh mailing list > > > [email protected] > > > http://onelab.info/mailman/listinfo/gmsh > > > > _______________________________________________ > > gmsh mailing list > > [email protected] > > http://onelab.info/mailman/listinfo/gmsh _______________________________________________ gmsh mailing list [email protected] http://onelab.info/mailman/listinfo/gmsh
