Good evening,
First of all I want to thank Dr. Colignon and Prof. Geuzaine for their
answers to my question http://onelab.info/pipermail/gmsh/2017/011502.html
<http://onelab.info/pipermail/gmsh/2017/011502.html> . Now I have another
problem. After I imported the geometry, which contains out of several
solids, and assigned physical volumes, surfaces and characteristic length
the mesh is nonconformal. When I activated sew faces before importing, I
have no Volumes in the statistic, so I cant assign physical Volumes.
Unfortunately I'm not allowed to upload the step file here.
I have used the search function and some years ago there was a discussion
with Dr. Zenker in 2013 :
http://onelab.info/pipermail/gmsh/2013/007880.html
<http://onelab.info/pipermail/gmsh/2013/007880.html> . He used a
workaround with netgen. I couldn't try it because our IT Department denied
my query to install it on my laptop.
Is there a solution within the new gmsh version 3 to heal the geometry and
to keep the volumes ?
Thanks for your time and support
Fabian
_______________________________________________
gmsh mailing list
[email protected]
http://onelab.info/mailman/listinfo/gmsh
