Hi Alessandro, There seems to be a little bug with "newp". As a workaround set
p1 = 1000; in Farfield.geo and everything will be ok. Christophe > On 22 Sep 2017, at 08:59, Alessandro Vicini <[email protected]> > wrote: > > > Yesterday I reported a problem I had when merging "farfield.geo" at the > bottom of "test.geo" (both files attached). Now I found out that merging > works if I switch to the built-in geometry kernel before (the geometry kernel > is set to openCascade at the beginning of test.geo). > There are still two problems, though: > > 1) The points that are defined in FarField.geo are lost after the merging > operation (I only get lines and surfaces, see attached picture where points > are red. FarField.geo contains the geometry of the outer shell); > 2) If I try to generate the 2D mesh, the code gets stuck in some infinite > loop. > > Could you please help with these issues? Thank you. > > A. > > > <Test.geo><FarField.geo><complete.jpg>_______________________________________________ > gmsh mailing list > [email protected] > http://onelab.info/mailman/listinfo/gmsh -- Prof. Christophe Geuzaine University of Liege, Electrical Engineering and Computer Science http://www.montefiore.ulg.ac.be/~geuzaine Free software: http://gmsh.info | http://getdp.info | http://onelab.info _______________________________________________ gmsh mailing list [email protected] http://onelab.info/mailman/listinfo/gmsh
