> On 25 Sep 2017, at 15:31, Alessandro Vicini <[email protected]> > wrote: > > > In fact that's what I did in the meantime as a workaround. > I'll wait for the bug to be fixed, thank you!
This should now be fixed on the master branch. Note that your .geo file contains a small mistake (Surface 47 is redefined). CG > > A. > > -----Messaggio originale----- > Da: Christophe Geuzaine [mailto:[email protected]] > Inviato: lunedì 25 settembre 2017 15:26 > A: Alessandro Vicini > Cc: [email protected] > Oggetto: Re: [Gmsh] problems (with opencascade?) > > > Hi Alessandro, > > There seems to be a little bug with "newp". As a workaround set > > p1 = 1000; > > in Farfield.geo and everything will be ok. > > Christophe > >> On 22 Sep 2017, at 08:59, Alessandro Vicini <[email protected]> >> wrote: >> >> >> Yesterday I reported a problem I had when merging "farfield.geo" at the >> bottom of "test.geo" (both files attached). Now I found out that merging >> works if I switch to the built-in geometry kernel before (the geometry >> kernel is set to openCascade at the beginning of test.geo). >> There are still two problems, though: >> >> 1) The points that are defined in FarField.geo are lost after the >> merging operation (I only get lines and surfaces, see attached picture >> where points are red. FarField.geo contains the geometry of the outer >> shell); >> 2) If I try to generate the 2D mesh, the code gets stuck in some infinite >> loop. >> >> Could you please help with these issues? Thank you. >> >> A. >> >> >> <Test.geo><FarField.geo><complete.jpg>________________________________ >> _______________ >> gmsh mailing list >> [email protected] >> http://onelab.info/mailman/listinfo/gmsh > > -- > Prof. Christophe Geuzaine > University of Liege, Electrical Engineering and Computer Science > http://www.montefiore.ulg.ac.be/~geuzaine > > Free software: http://gmsh.info | http://getdp.info | http://onelab.info > -- Prof. Christophe Geuzaine University of Liege, Electrical Engineering and Computer Science http://www.montefiore.ulg.ac.be/~geuzaine Free software: http://gmsh.info | http://getdp.info | http://onelab.info _______________________________________________ gmsh mailing list [email protected] http://onelab.info/mailman/listinfo/gmsh
