I unzipped and checked your files. Note that, in "blade1_2.msh", point 115 is owned only by edge 90. This proves that edge 90 is not attached to a cell.
On Tue, Mar 6, 2018 at 12:30 AM, Anthony Royer <[email protected]> wrote: > Unfortunately, I'm not able to reproduce the bug. If you recompute the > partition, the error is still there and stays at the same place? > > Here is an archive containing the partitioned meshes that I obtain with > your geometry. > > > > > Le 5 mars 2018 à 21:50, Orxan Shibliyev <[email protected]> a écrit : > > No, I pulled from the repository. I made a mistake that the file was > blade3_2.msh not blade3_4.msh. I attached "blade3_2.png". Note surface > cells 89 and 90 at the bottom. Can you check blade3_2.msh again? > > On Mon, Mar 5, 2018 at 9:12 PM, [email protected] < > [email protected]> wrote: > >> Hi >> >> I have run the same command on your geometry and I don’t have the problem >> you mentioned. >> >> Do you compile Gmsh from the sources ? If yes, could you try with the >> most recent version on the gitlab (https://gitlab.onelab.info/gm >> sh/gmsh.git) ? >> >> Anthony Royer >> >> Le 5 mars 2018 à 11:00, Orxan Shibliyev <[email protected]> a >> écrit : >> >> The geo file is attached. When "gmsh blade3.geo -part_split -part 9" is >> applied "blade3_4.msh" has two edges which are isolated from their cells. >> My version is 3.0.7. >> >> On Mon, Mar 5, 2018 at 10:30 AM, Christophe Geuzaine <[email protected] >> > wrote: >> >>> >>> >>> On 4 Mar 2018, at 19:31, Orxan Shibliyev <[email protected]> wrote: >>> >>> Hi >>> >>> I do the following command: >>> >>> gmsh file.geo -part_split -part 9 >>> >>> Sometimes, I get a partitioned file such that a surface edge which is >>> supposed to be part of a quadrangle is stored alone. Is there a way to >>> force surface edges to be stored together with their cells? In other words, >>> I do not want an isolated edge whose only one point is connected to mesh >>> and other point is dangling. >>> >>> >>> Can you send a simple example where this happens? >>> >>> >>> Thanks, >>> Orhan >>> _______________________________________________ >>> gmsh mailing list >>> [email protected] >>> http://onelab.info/mailman/listinfo/gmsh >>> >>> >>> — >>> Prof. Christophe Geuzaine >>> University of Liege, Electrical Engineering and Computer Science >>> http://www.montefiore.ulg.ac.be/~geuzaine >>> >>> Free software: http://gmsh.info | http://getdp.info | http://onelab.info >>> >>> >> <blade3.geo> >> >> > <blade3_2.png> > > > >
_______________________________________________ gmsh mailing list [email protected] http://onelab.info/mailman/listinfo/gmsh
