Hi Paul, The full-hex developments are currently happening outside the Gmsh tree, in an external project. The experimental unstructured hex code in Gmsh will be replaced by this eventually, but it is a medium-term goal (hopefully next year).
Christophe > On 17 May 2018, at 14:42, cristini paul <[email protected]> wrote: > > Dear all, > > I am trying to use gmsh to mesh with hexaedra two volumes separated by a > smooth non-flat interface. The entire volume is a cube. > > After many tries, I identified a meshing strategy but the results is not good > enough. > > Is there a preferred strategy for the choice of a 2D and 3D algorithms to > achieve this objective ? > > I faced many crashes depending on the options I chose. > > I was able to obtain very good 2D meshes but when trying to get a 3D mesh the > result is not good. > > Thank you > > Paul > > -- > *--------------------------------------------------------------------------* > Paul CRISTINI Charge de Recherche CNRS (HDR) / CNRS Research Scientist > *--------------------------------------------------------------------------* > CNRS - Laboratoire de Mecanique et d'Acoustique (UMR 7031) > Bureau 119 > 4 Impasse Nikola Tesla, CS 40006, F-13453 Marseille Cedex 13 - France > mailto: [email protected] > phone number: +33 (0)4 84 52 42 51 > http://www.lma.cnrs-mrs.fr/ > *--------------------------------------------------------------------------* > > > _______________________________________________ > gmsh mailing list > [email protected] > http://onelab.info/mailman/listinfo/gmsh _______________________________________________ gmsh mailing list [email protected] http://onelab.info/mailman/listinfo/gmsh
