Thinking about the .opt file, of course it doesn't work the second time: the view is numbered differently. The other problem hopefully has a real cause!
On Sat, Aug 25, 2018 at 11:34 AM, Max Orok <[email protected]> wrote: > Here is your basic solver (it seems any solver will do) and a mesh file > that shows the issue. > > With the solver open, open the .msh file. There should be two duplicate > views loaded into the GUI. > In addition, the .opt file (to not open the view automatically) is ignored > the second time it is loaded. > > Without the solver loaded (i.e. no run button in the gui) the duplicate > views don't show up. > I think the problem may be bound up in the database files; I had an old > .db file that when loaded, did not have this problem. > > On Sat, Aug 25, 2018 at 3:35 AM, Christophe Geuzaine <[email protected]> > wrote: > >> >> Can you send an example? >> >> > On 23 Aug 2018, at 22:48, Max Orok <[email protected]> wrote: >> > >> > Hi everyone, >> > >> > On loading simulation results into the Gmsh GUI after running a C++ >> solver from it, there are duplicates of each view loaded. It seems the >> solver is running twice, the second time loading the views? Is there anyway >> to disable this? >> > >> > -- >> > Max Orok >> > Summer Student >> > www.mevex.com >> > >> > >> > _______________________________________________ >> > gmsh mailing list >> > [email protected] >> > http://onelab.info/mailman/listinfo/gmsh >> >> — >> Prof. Christophe Geuzaine >> University of Liege, Electrical Engineering and Computer Science >> http://www.montefiore.ulg.ac.be/~geuzaine >> >> Free software: http://gmsh.info | http://getdp.info | http://onelab.info >> >> > > > -- > Max Orok > Summer Student > www.mevex.com > > > -- Max Orok Summer Student www.mevex.com
_______________________________________________ gmsh mailing list [email protected] http://onelab.info/mailman/listinfo/gmsh
