Hi Max,
Indeed, it's part of the design of the solver interface: the model is loaded
for each phase of the computation (initialization, parameter checking and
actual run). When you just open a mesh file (with a post-processing view), it
gets read twice (init and check) which leads to 2 duplicate views. You could
either load a geometrical model, or (what we usually do) let the solver perform
the load: you can then decide what to do depending on the calculation phase
("action").
Christophe
> On 25 Aug 2018, at 17:37, Max Orok <[email protected]> wrote:
>
> Thinking about the .opt file, of course it doesn't work the second time: the
> view is numbered differently. The other problem hopefully has a real cause!
>
> On Sat, Aug 25, 2018 at 11:34 AM, Max Orok <[email protected]> wrote:
> Here is your basic solver (it seems any solver will do) and a mesh file that
> shows the issue.
>
> With the solver open, open the .msh file. There should be two duplicate views
> loaded into the GUI.
> In addition, the .opt file (to not open the view automatically) is ignored
> the second time it is loaded.
>
> Without the solver loaded (i.e. no run button in the gui) the duplicate views
> don't show up.
> I think the problem may be bound up in the database files; I had an old .db
> file that when loaded, did not have this problem.
>
> On Sat, Aug 25, 2018 at 3:35 AM, Christophe Geuzaine <[email protected]>
> wrote:
>
> Can you send an example?
>
> > On 23 Aug 2018, at 22:48, Max Orok <[email protected]> wrote:
> >
> > Hi everyone,
> >
> > On loading simulation results into the Gmsh GUI after running a C++ solver
> > from it, there are duplicates of each view loaded. It seems the solver is
> > running twice, the second time loading the views? Is there anyway to
> > disable this?
> >
> > --
> > Max Orok
> > Summer Student
> > www.mevex.com
> >
> >
> > _______________________________________________
> > gmsh mailing list
> > [email protected]
> > http://onelab.info/mailman/listinfo/gmsh
>
> —
> Prof. Christophe Geuzaine
> University of Liege, Electrical Engineering and Computer Science
> http://www.montefiore.ulg.ac.be/~geuzaine
>
> Free software: http://gmsh.info | http://getdp.info | http://onelab.info
>
>
>
>
> --
> Max Orok
> Summer Student
> www.mevex.com
>
>
>
>
>
> --
> Max Orok
> Summer Student
> www.mevex.com
>
>
> _______________________________________________
> gmsh mailing list
> [email protected]
> http://onelab.info/mailman/listinfo/gmsh
—
Prof. Christophe Geuzaine
University of Liege, Electrical Engineering and Computer Science
http://www.montefiore.ulg.ac.be/~geuzaine
Free software: http://gmsh.info | http://getdp.info | http://onelab.info
_______________________________________________
gmsh mailing list
[email protected]
http://onelab.info/mailman/listinfo/gmsh
