Could you also check with Gmsh 4.4 ? Christophe
> On 8 Jul 2019, at 15:12, Alessandro Vicini <[email protected]> > wrote: > > > > In the attached Test_05.geo file (together with spline.geo and background.geo > which are merged into it), I need to generate the Volume between the internal > and external surfaces (which would be the difference between volumes 2 and 1, > as defined in the file). > The problem is that, in the definition of the internal volume, gmsh sees its > boundary surfaces as “embedded”, as can be seen from the attached screen.jpg. > This is maintained when the new volume is generated, so that the “hole” is > not obtained. > Somebody could please suggest how to work this out? Thank you! > > Alessandro > <background.geo><spline.geo><Test_05.geo><screen.jpg>_______________________________________________ > gmsh mailing list > [email protected] > http://onelab.info/mailman/listinfo/gmsh — Prof. Christophe Geuzaine University of Liege, Electrical Engineering and Computer Science http://www.montefiore.ulg.ac.be/~geuzaine _______________________________________________ gmsh mailing list [email protected] http://onelab.info/mailman/listinfo/gmsh
