Maybe try setting PostProcessing.HorizontalScales = 0; ? [image: image.png]
http://gmsh.info/doc/texinfo/gmsh.html#Post_002dprocessing-options-list Sincerely, Max On Wed, Dec 4, 2019 at 1:52 PM Marco Tiberga <[email protected]> wrote: > Dear Gmsh community, > > > > Is there a way to change the position of the value scale in any kind of > View? > > I tried with the most recent Gmsh snapshot, but if I go to “View options” > -> “Axes” -> “2D axes/value scale position” only the option “manual” seems > to actually be able to change the position. I am using the GUI, FYI. > > > > However, I cannot obtain what I want. > > The “Automatic” position is at the bottom-center of the screen and the > scale is horizontal. If possible, I would like to have a vertical scale, to > the left or right of the view. > > > > Thanks a lot for your help, in advance. > > > > Best regards, > > Marco Tiberga > > PhD candidate > > Delft University of Technology > > Faculty of Applied Sciences > > Radiation Science & Technology Department > > Mekelweg 15, 2629 JB Delft, The Netherlands > > E-Mail: *[email protected] <[email protected]>* > > Website: http://www.nera.rst.tudelft.nl/ > > > > > _______________________________________________ > gmsh mailing list > [email protected] > http://onelab.info/mailman/listinfo/gmsh > -- Max Orok Contractor www.mevex.com
_______________________________________________ gmsh mailing list [email protected] http://onelab.info/mailman/listinfo/gmsh
