System : $ lspci 00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 04) 00:01.0 PCI bridge: Intel Corporation Mobile 915GM/PM Express PCI Express Root Port (rev 04) 00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 04) 00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 04) 00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 04) 00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 04) 00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 04) 00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 04) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d4) 00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 04) 00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 04) 00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 04) 01:03.0 Network controller: Intel Corporation PRO/Wireless 2200BG Network Connection (rev 05) 01:04.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) 01:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10) 01:07.0 RAID bus controller: VIA Technologies, Inc. VT6421 IDE RAID Controller (rev 50) 03:00.0 VGA compatible controller: nVidia Corporation NV41.8 [GeForce Go 6800] (rev a2)
$ lspci 00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 04) 00:01.0 PCI bridge: Intel Corporation Mobile 915GM/PM Express PCI Express Root Port (rev 04) 00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 04) 00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 04) 00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 04) 00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 04) 00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 04) 00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 04) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d4) 00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 04) 00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 04) 00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 04) 01:03.0 Network controller: Intel Corporation PRO/Wireless 2200BG Network Connection (rev 05) 01:04.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) 01:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10) 01:07.0 RAID bus controller: VIA Technologies, Inc. VT6421 IDE RAID Controller (rev 50) 03:00.0 VGA compatible controller: nVidia Corporation NV41.8 [GeForce Go 6800] (rev a2) ____________________________________________________________________ dmesg [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.24-24-generic (r...@sandbox) (gcc version 4.2.4 (Ubuntu 4.2.4-1ubuntu4)) #1 SMP Wed Jul 15 09:17:42 UTC 2009 (Ubuntu 2.6.24-24.56gnewsense6-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003ffd0000 (usable) [ 0.000000] BIOS-e820: 000000003ffd0000 - 000000003ffde000 (ACPI data) [ 0.000000] BIOS-e820: 000000003ffde000 - 0000000040000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000fed13000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] 127MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000ff780 [ 0.000000] Entering add_active_range(0, 0, 262096) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 262096 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 262096 [ 0.000000] On node 0 totalpages: 262096 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 255 pages used for memmap [ 0.000000] HighMem zone: 32465 pages, LIFO batch:7 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP signature @ 0xC00F8110 checksum 0 [ 0.000000] ACPI: RSDP 000F8110, 0014 (r0 ACPIAM) [ 0.000000] ACPI: RSDT 3FFD0000, 003C (r1 A M I OEMRSDT 10000505 MSFT 97) [ 0.000000] ACPI: FACP 3FFD0200, 0084 (r2 A M I OEMFACP 10000505 MSFT 97) [ 0.000000] ACPI: DSDT 3FFD0430, 4A43 (r1 UW____ F18_____ 1 INTL 2002026) [ 0.000000] ACPI: FACS 3FFDE000, 0040 [ 0.000000] ACPI: APIC 3FFD0390, 0054 (r1 A M I OEMAPIC 10000505 MSFT 97) [ 0.000000] ACPI: MCFG 3FFD03F0, 003C (r1 A M I OEMMCFG 10000505 MSFT 97) [ 0.000000] ACPI: OEMB 3FFDE040, 0046 (r1 A M I AMI_OEM 10000505 MSFT 97) [ 0.000000] ACPI: MCFG 3FFD4E80, 003C (r1 A M I OEMMCFG 10000505 MSFT 97) [ 0.000000] ACPI: SSDT 3FFD4EC0, 03F6 (r1 AMI CPU1PM 1 INTL 2002026) [ 0.000000] ACPI: DMI detected: Fujitsu Siemens [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:13 APIC version 20 [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bed13000) [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260049 [ 0.000000] Kernel command line: root=UUID=8ff488d7-093c-4350-abfe-4807c08eb7e2 ro quiet splash [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1866.760 MHz processor. [ 10.553574] Console: colour VGA+ 80x25 [ 10.553580] console [tty0] enabled [ 10.554163] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 10.554935] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 10.611346] Memory: 1027504k/1048384k available (2176k kernel code, 20220k reserved, 1007k data, 368k init, 130880k highmem) [ 10.611361] virtual kernel memory layout: [ 10.611362] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 10.611366] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 10.611367] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 10.611371] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 10.611372] .init : 0xc0421000 - 0xc047d000 ( 368 kB) [ 10.611375] .data : 0xc0320188 - 0xc041bdc4 (1007 kB) [ 10.611377] .text : 0xc0100000 - 0xc0320188 (2176 kB) [ 10.611385] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 10.611448] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 [ 10.691409] Calibrating delay using timer specific routine.. 3738.80 BogoMIPS (lpj=7477609) [ 10.691453] Security Framework initialized [ 10.691467] SELinux: Disabled at boot. [ 10.691493] AppArmor: AppArmor initialized [ 10.691502] Failure registering capabilities with primary security module. [ 10.691517] Mount-cache hash table entries: 512 [ 10.691737] Initializing cgroup subsys ns [ 10.691747] Initializing cgroup subsys cpuacct [ 10.691764] CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000 00000000 [ 10.691786] CPU: L1 I cache: 32K, L1 D cache: 32K [ 10.691791] CPU: L2 cache: 2048K [ 10.691797] CPU: After all inits, caps: afe9fbff 00100000 00000000 00042040 00000180 00000000 00000000 00000000 [ 10.691815] Compat vDSO mapped to ffffe000. [ 10.691835] Checking 'hlt' instruction... OK. [ 10.708076] SMP alternatives: switching to UP code [ 10.711436] Freeing SMP alternatives: 11k freed [ 10.711634] Early unpacking initramfs... done [ 11.359800] ACPI: Core revision 20070126 [ 11.359909] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 11.364267] CPU0: Intel(R) Pentium(R) M processor 1.86GHz stepping 08 [ 11.364298] Total of 1 processors activated (3738.80 BogoMIPS). [ 11.364551] ENABLING IO-APIC IRQs [ 11.364781] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 11.510721] Brought up 1 CPUs [ 11.510762] CPU0 attaching sched-domain: [ 11.510767] domain 0: span 01 [ 11.510771] groups: 01 [ 11.511060] net_namespace: 64 bytes [ 11.511079] Booting paravirtualized kernel on bare hardware [ 11.511894] Time: 11:03:08 Date: 07/30/09 [ 11.511937] NET: Registered protocol family 16 [ 11.512277] EISA bus registered [ 11.512314] ACPI: bus type pci registered [ 11.512685] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=3 [ 11.512690] PCI: Using configuration type 1 [ 11.512715] Setting up standard PCI resources [ 11.539151] ACPI: EC: Look up EC in DSDT [ 11.542946] ACPI: Interpreter enabled [ 11.542952] ACPI: (supports S0 S3 S4 S5) [ 11.542977] ACPI: Using IOAPIC for interrupt routing [ 11.656838] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62 [ 11.656843] ACPI: EC: driver started in poll mode [ 11.657008] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 11.657871] Force enabled HPET at base address 0xfed00000 [ 11.657881] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO [ 11.657887] PCI quirk: region 0480-04bf claimed by ICH6 GPIO [ 11.658875] PCI: Transparent bridge - 0000:00:1e.0 [ 11.658920] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 11.659166] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 11.659376] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT] [ 11.714570] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 12.607279] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 12.607381] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 12.607481] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 12.607580] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 12.607679] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 12.607780] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 12.607880] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 12.607980] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 12.608082] Linux Plug and Play Support v0.97 (c) Adam Belay [ 12.608108] pnp: PnP ACPI init [ 12.608116] ACPI: bus type pnp registered [ 12.613627] pnp: PnP ACPI: found 12 devices [ 12.613629] ACPI: ACPI bus type pnp unregistered [ 12.613633] PnPBIOS: Disabled by ACPI PNP [ 12.613818] PCI: Using ACPI for IRQ routing [ 12.613821] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 12.613826] PCI: Cannot allocate resource region 7 of bridge 0000:00:1e.0 [ 12.613850] PCI: Cannot allocate resource region 0 of device 0000:01:07.0 [ 12.613852] PCI: Cannot allocate resource region 1 of device 0000:01:07.0 [ 12.613854] PCI: Cannot allocate resource region 2 of device 0000:01:07.0 [ 12.613856] PCI: Cannot allocate resource region 3 of device 0000:01:07.0 [ 12.613859] PCI: Cannot allocate resource region 4 of device 0000:01:07.0 [ 12.613861] PCI: Cannot allocate resource region 5 of device 0000:01:07.0 [ 12.625588] NET: Registered protocol family 8 [ 12.625590] NET: Registered protocol family 20 [ 12.625731] hpet clockevent registered [ 12.625736] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 12.625740] hpet0: 3 64-bit timers, 14318180 Hz [ 12.626770] AppArmor: AppArmor Filesystem Enabled [ 12.629572] Time: tsc clocksource has been installed. [ 12.637596] system 00:01: iomem range 0xfed13000-0xfed19fff could not be reserved [ 12.637604] system 00:08: ioport range 0x4d0-0x4d1 has been reserved [ 12.637607] system 00:08: ioport range 0x800-0x87f has been reserved [ 12.637609] system 00:08: ioport range 0x480-0x4bf has been reserved [ 12.637612] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 12.637615] system 00:08: iomem range 0xfed20000-0xfed8ffff has been reserved [ 12.637618] system 00:08: iomem range 0xffb00000-0xffbfffff has been reserved [ 12.637620] system 00:08: iomem range 0xfff80000-0xffffffff could not be reserved [ 12.637625] system 00:09: iomem range 0xfec00000-0xfec00fff has been reserved [ 12.637628] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved [ 12.637635] system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved [ 12.637640] system 00:0b: iomem range 0x0-0x9ffff could not be reserved [ 12.637643] system 00:0b: iomem range 0xc0000-0xcffff could not be reserved [ 12.637646] system 00:0b: iomem range 0xe0000-0xfffff could not be reserved [ 12.637649] system 00:0b: iomem range 0x100000-0x3fffffff could not be reserved [ 12.637651] system 00:0b: iomem range 0x0-0x0 could not be reserved [ 12.667976] PCI: Bridge: 0000:00:01.0 [ 12.667978] IO window: disabled. [ 12.667981] MEM window: faa00000-feafffff [ 12.667984] PREFETCH window: bfe00000-dfefffff [ 12.667987] PCI: Bridge: 0000:00:1c.0 [ 12.667990] IO window: d000-dfff [ 12.667994] MEM window: bfc00000-bfcfffff [ 12.667997] PREFETCH window: bfd00000-bfdfffff [ 12.668020] PCI: Bridge: 0000:00:1e.0 [ 12.668021] IO window: disabled. [ 12.668025] MEM window: fa900000-fa9fffff [ 12.668029] PREFETCH window: disabled. [ 12.668043] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 12.668047] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 12.668061] PCI: Enabling device 0000:00:1c.0 (0106 -> 0107) [ 12.668064] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 12.668069] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 12.668077] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 12.668086] NET: Registered protocol family 2 [ 12.705552] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 12.705761] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 12.706497] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 12.706970] TCP: Hash tables configured (established 131072 bind 65536) [ 12.706973] TCP reno registered [ 12.717642] checking if image is initramfs... it is [ 13.129102] Switched to high resolution mode on CPU 0 [ 13.346819] Freeing initrd memory: 7087k freed [ 13.347385] audit: initializing netlink socket (disabled) [ 13.347401] audit(1248951789.076:1): initialized [ 13.347563] highmem bounce pool size: 64 pages [ 13.349296] VFS: Disk quotas dquot_6.5.1 [ 13.349367] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 13.349491] io scheduler noop registered [ 13.349494] io scheduler anticipatory registered [ 13.349495] io scheduler deadline registered [ 13.349505] io scheduler cfq registered (default) [ 13.376761] Boot video device is 0000:03:00.0 [ 13.376853] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 13.376880] assign_interrupt_mode Found MSI capability [ 13.376905] Allocate Port Service[0000:00:01.0:pcie00] [ 13.376972] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 13.377005] assign_interrupt_mode Found MSI capability [ 13.377032] Allocate Port Service[0000:00:1c.0:pcie00] [ 13.377060] Allocate Port Service[0000:00:1c.0:pcie02] [ 13.377234] isapnp: Scanning for PnP cards... [ 13.730240] isapnp: No Plug & Play device found [ 13.754171] Real Time Clock Driver v1.12ac [ 13.754271] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 13.755335] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 13.755399] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 13.755489] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 13.759957] i8042.c: Detected active multiplexing controller, rev 1.0. [ 13.760697] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 13.760701] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 13.760704] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 13.760706] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 13.760708] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 13.772379] mice: PS/2 mouse device common for all mice [ 13.772476] EISA: Probing bus 0 at eisa.0 [ 13.772482] Cannot allocate resource for EISA slot 1 [ 13.772502] EISA: Detected 0 cards. [ 13.772506] cpuidle: using governor ladder [ 13.772507] cpuidle: using governor menu [ 13.772593] NET: Registered protocol family 1 [ 13.772627] Using IPI No-Shortcut mode [ 13.772660] registered taskstats version 1 [ 13.772754] Magic number: 1:938:75 [ 13.772851] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 13.772852] EDD information not available. [ 13.773032] Freeing unused kernel memory: 368k freed [ 13.773057] Write protecting the kernel read-only data: 800k [ 13.775377] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 14.951112] fuse init (API version 7.9) [ 14.970349] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 14.970354] ACPI: Processor [CPU1] (supports 8 throttling states) [ 14.976368] ACPI: Thermal Zone [THRM] (68 C) [ 15.466597] usbcore: registered new interface driver usbfs [ 15.466619] usbcore: registered new interface driver hub [ 15.472677] usbcore: registered new device driver usb [ 15.490546] USB Universal Host Controller Interface driver v3.0 [ 15.490605] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 17 [ 15.490615] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 15.490619] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 15.490944] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 15.490971] uhci_hcd 0000:00:1d.0: irq 17, io base 0x0000e480 [ 15.491097] usb usb1: configuration #1 chosen from 1 choice [ 15.491120] hub 1-0:1.0: USB hub found [ 15.491125] hub 1-0:1.0: 2 ports detected [ 15.594523] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18 [ 15.594536] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 15.594540] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 15.594561] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 15.594588] uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000e800 [ 15.594691] usb usb2: configuration #1 chosen from 1 choice [ 15.594713] hub 2-0:1.0: USB hub found [ 15.594719] hub 2-0:1.0: 2 ports detected [ 15.594940] SCSI subsystem initialized [ 15.650716] libata version 3.00 loaded. [ 15.698405] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19 [ 15.698418] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 15.698422] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 15.698443] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 15.698471] uhci_hcd 0000:00:1d.2: irq 19, io base 0x0000e880 [ 15.698579] usb usb3: configuration #1 chosen from 1 choice [ 15.698603] hub 3-0:1.0: USB hub found [ 15.698608] hub 3-0:1.0: 2 ports detected [ 15.802287] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16 [ 15.802299] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 15.802303] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 15.802326] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 15.802354] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ec00 [ 15.802454] usb usb4: configuration #1 chosen from 1 choice [ 15.802475] hub 4-0:1.0: USB hub found [ 15.802481] hub 4-0:1.0: 2 ports detected [ 15.906291] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 17 [ 15.906304] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 15.906308] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 15.906331] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 15.910222] ehci_hcd 0000:00:1d.7: debug port 1 [ 15.910228] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 15.910234] ehci_hcd 0000:00:1d.7: irq 17, io mem 0xfebffc00 [ 15.926069] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 15.926171] usb usb5: configuration #1 chosen from 1 choice [ 15.926193] hub 5-0:1.0: USB hub found [ 15.926198] hub 5-0:1.0: 8 ports detected [ 16.030139] r8169 Gigabit Ethernet driver 2.2LK loaded [ 16.030167] ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 19 (level, low) -> IRQ 18 [ 16.030186] r8169 0000:01:05.0: no PCI Express capability [ 16.030390] eth0: RTL8169sb/8110sb at 0xf8832c00, 00:03:0d:38:f0:96, XID 10000000 IRQ 18 [ 16.030980] ACPI: PCI Interrupt 0000:01:04.0[A] -> GSI 18 (level, low) -> IRQ 19 [ 16.080707] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[fa9ff000-fa9ff7ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 16.083937] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 19 [ 16.083970] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 16.083981] ACPI: PCI interrupt for device 0000:00:1f.1 disabled [ 16.086813] sata_via 0000:01:07.0: version 2.3 [ 16.086831] ACPI: PCI Interrupt 0000:01:07.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 16.086856] sata_via 0000:01:07.0: routed to hard irq line 10 [ 16.087743] scsi0 : sata_via [ 16.088101] scsi1 : sata_via [ 16.088447] scsi2 : sata_via [ 16.088477] ata1: SATA max UDMA/133 port i...@0x1420 bmdma 0x1400 irq 16 [ 16.088481] ata2: SATA max UDMA/133 port i...@0x1430 bmdma 0x1408 irq 16 [ 16.088483] ata3: PATA max UDMA/133 port i...@0x1440 bmdma 0x1410 irq 16 [ 16.553435] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 16.561755] ata1.00: ATA-7: FUJITSU MHT2080BH, 0000104B, max UDMA/100 [ 16.561759] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 16.577785] ata1.00: configured for UDMA/100 [ 16.621338] Clocksource tsc unstable (delta = -1898642544 ns) [ 16.625330] Time: hpet clocksource has been installed. [ 16.672663] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 16.673664] ata2.00: ATA-7: FUJITSU MHT2080BH, 0000104B, max UDMA/100 [ 16.673668] ata2.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 16.675304] ata2.00: configured for UDMA/100 [ 16.695258] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHT2080B 0000 PQ: 0 ANSI: 5 [ 16.695560] scsi 1:0:0:0: Direct-Access ATA FUJITSU MHT2080B 0000 PQ: 0 ANSI: 5 [ 16.700696] ata_piix 0000:00:1f.1: version 2.12 [ 16.700710] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 19 [ 16.700742] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 16.701013] scsi3 : ata_piix [ 16.701273] scsi4 : ata_piix [ 16.702399] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 16.702402] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 16.710053] Driver 'sd' needs updating - please use bus_type methods [ 16.710123] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 16.710135] sd 0:0:0:0: [sda] Write Protect is off [ 16.710137] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 16.710151] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 16.710194] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) [ 16.710203] sd 0:0:0:0: [sda] Write Protect is off [ 16.710205] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 16.710219] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 16.710222] sda: sda1 sda2 sda3 [ 16.719936] sd 0:0:0:0: [sda] Attached SCSI disk [ 16.720385] sd 1:0:0:0: [sdb] 156301488 512-byte hardware sectors (80026 MB) [ 16.720396] sd 1:0:0:0: [sdb] Write Protect is off [ 16.720398] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 16.720413] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 16.720448] sd 1:0:0:0: [sdb] 156301488 512-byte hardware sectors (80026 MB) [ 16.720456] sd 1:0:0:0: [sdb] Write Protect is off [ 16.720459] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 16.720473] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 16.720476] sdb:<7>ieee1394: Host added: ID:BUS[0-00:1023] GUID[00030d4971e37e1b] [ 16.726913] sdb1 [ 16.726955] sd 1:0:0:0: [sdb] Attached SCSI disk [ 16.733890] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 16.733907] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 16.842236] ata4.00: ATAPI: _NEC DVD+/-RW ND-6650A, 1.42, max UDMA/33 [ 16.867897] ata4.00: configured for UDMA/33 [ 16.886557] scsi 3:0:0:0: CD-ROM _NEC DVD+-RW ND-6650A 1.42 PQ: 0 ANSI: 5 [ 16.886626] scsi 3:0:0:0: Attached scsi generic sg2 type 5 [ 16.893382] Driver 'sr' needs updating - please use bus_type methods [ 16.903030] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 16.903033] Uniform CD-ROM driver Revision: 3.20 [ 16.903072] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 16.951052] Attempting manual resume [ 16.951055] swsusp: Resume From Partition 8:2 [ 16.951057] PM: Checking swsusp image. [ 16.951277] PM: Resume from disk failed. [ 16.978947] kjournald starting. Commit interval 5 seconds [ 16.978956] EXT3-fs: mounted filesystem with ordered data mode. [ 21.082993] Linux agpgart interface v0.102 [ 21.167192] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 21.247389] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 21.391663] input: Power Button (FF) as /devices/virtual/input/input2 [ 21.404964] ACPI: Power Button (FF) [PWRF] [ 21.405064] input: Lid Switch as /devices/virtual/input/input3 [ 21.405128] ACPI: Lid Switch [LID] [ 21.405184] input: Sleep Button (CM) as /devices/virtual/input/input4 [ 21.415704] ACPI: Sleep Button (CM) [SLPB] [ 21.415778] input: Power Button (CM) as /devices/virtual/input/input5 [ 21.431103] ACPI: Power Button (CM) [PWRB] [ 21.998880] ACPI: AC Adapter [AC0] (on-line) [ 22.229956] ACPI: Battery Slot [BAT0] (battery present) [ 22.472270] ACPI Error (utglobal-0126): Unknown exception code: 0xFFFFFFFE [20070126] [ 22.472277] Pid: 2965, comm: modprobe Not tainted 2.6.24-24-generic #1 [ 22.472286] [<c024fe88>] acpi_format_exception+0x35/0x3f [ 22.472296] [<c024ec8a>] acpi_ut_exception+0xc/0x55 [ 22.472301] [<f88d99e4>] acpi_video_bus_add+0xb0b/0xb1a [video] [ 22.472308] [<c01d788d>] sysfs_addrm_start+0x6d/0xb0 [ 22.472318] [<c02533ba>] acpi_device_probe+0x33/0x7c [ 22.472323] [<c0282218>] driver_probe_device+0x88/0x190 [ 22.472328] [<c0216290>] kobject_uevent_env+0xf0/0x3d0 [ 22.472335] [<c028248e>] __driver_attach+0x9e/0xa0 [ 22.472339] [<c028164b>] bus_for_each_dev+0x3b/0x60 [ 22.472344] [<c0282096>] driver_attach+0x16/0x20 [ 22.472347] [<c02823f0>] __driver_attach+0x0/0xa0 [ 22.472351] [<c02819ca>] bus_add_driver+0x8a/0x1e0 [ 22.472356] [<f886c02f>] acpi_video_init+0x2f/0x4d [video] [ 22.472360] [<c0150806>] sys_init_module+0x126/0x19c0 [ 22.472376] [<c0253687>] acpi_bus_register_driver+0x0/0x38 [ 22.472383] [<c01043b2>] sysenter_past_esp+0x6b/0xa9 [ 22.472390] ======================= [ 22.472393] ACPI Exception (video-1718): UNKNOWN_STATUS_CODE, Cant attach device [20070126] [ 22.472503] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:19/LNXVIDEO:00/input/input6 [ 22.487171] ACPI: Video Device [PEG] (multi-head: yes rom: no post: no) [ 22.956011] ACPI: WMI-Acer: Mapper loaded [ 23.013502] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 23.013526] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 23.077425] intel_rng: FWH not detected [ 23.177270] iTCO_vendor_support: vendor-support=0 [ 23.213228] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 23.213302] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x0860) [ 23.213333] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 23.380524] ieee80211_crypt: registered algorithm 'NULL' [ 23.421321] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 23.421325] ieee80211: Copyright (C) 2004-2005 Intel Corporation <[email protected]> [ 23.510012] input: PC Speaker as /devices/platform/pcspkr/input/input7 [ 23.549660] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq [ 23.549664] ipw2200: Copyright(c) 2003-2006 Intel Corporation [ 23.549745] ACPI: PCI Interrupt 0000:01:03.0[A] -> GSI 19 (level, low) -> IRQ 18 [ 23.567016] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection [ 24.164322] Synaptics Touchpad, model: 1, fw: 6.2, id: 0xa0b1, caps: 0xa04713/0x20040a [ 24.200379] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input8 [ 24.874457] ipw2200: ipw2200-bss.fw request_firmware failed: Reason -2 [ 24.874462] ipw2200: Unable to load firmware: -2 [ 24.874466] ipw2200: failed to register network device [ 24.874536] ACPI: PCI interrupt for device 0000:01:03.0 disabled [ 24.874551] ipw2200: probe of 0000:01:03.0 failed with error -5 [ 25.048661] lp: driver loaded but no devices found [ 25.187323] Adding 2096472k swap on /dev/sda2. Priority:-1 extents:1 across:2096472k [ 25.594537] EXT3 FS on sda3, internal journal [ 26.092786] ip_tables: (C) 2000-2006 Netfilter Core Team [ 26.394603] No dock devices found. [ 27.001321] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) [ 27.001326] apm: overridden by ACPI. [ 27.053331] ppdev: user-space parallel port driver [ 27.124442] audit(1248944610.828:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=4903 profile="/usr/sbin/cupsd" namespace="default" [ 63.648200] Marking TSC unstable due to: cpufreq changes. [ 64.640252] r8169: eth0: link up [ 64.792998] Bluetooth: Core ver 2.11 [ 64.793728] NET: Registered protocol family 31 [ 64.793734] Bluetooth: HCI device and connection manager initialized [ 64.793742] Bluetooth: HCI socket layer initialized [ 64.862671] Bluetooth: L2CAP ver 2.9 [ 64.862679] Bluetooth: L2CAP socket layer initialized [ 27.848011] Bluetooth: RFCOMM socket layer initialized [ 27.848024] Bluetooth: RFCOMM TTY layer initialized [ 27.848026] Bluetooth: RFCOMM ver 1.8 [ 67.470986] NET: Registered protocol family 17 [ 68.254480] NET: Registered protocol family 10 [ 68.255336] lo: Disabled Privacy Extensions [ 73.489094] eth0: no IPv6 routers present [ 578.793713] usb 2-2: new full speed USB device using uhci_hcd and address 2 [ 578.825046] usb 2-2: configuration #1 chosen from 1 choice [ 248.079242] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04A9 pid 0x1091 [ 248.079472] usbcore: registered new interface driver usblp Printer | usb : lsusb Bus 005 Device 001: ID 0000:0000 Bus 004 Device 001: ID 0000:0000 Bus 003 Device 001: ID 0000:0000 Bus 002 Device 002: ID 04a9:1091 Canon, Inc. Bus 002 Device 001: ID 0000:0000 Bus 001 Device 001: ID 0000:0000 The system find the printer but no exact drivers, when i sent printing order, it don't print anything Thanks to all for your help aurelien _______________________________________________ gNewSense-users mailing list [email protected] http://lists.nongnu.org/mailman/listinfo/gnewsense-users
