I had similar problems with the pppd that comes stock with rh6.1. Check
for the erratas. I had to download the errata to correct the problem I
was having.
http://www.redhat.com/support/errata/rh61-errata-bugfixes.html
Paul Whelan
On Wed, 26 Jan 2000, John Feole - Sun Microsystems wrote:
> Hi,
>
> When I fresh installed the RH6.1 server
> last Saturday, I setup the IPMasq setup using my previous configs that I
> had tarred up beforehand...RH6.0 used pppd ver 2.3.7 and RH6.1 uses pppd
> 2.3.10 and it seems to have been changed...The first error I get with
> the pppd 2.3.10 is a quick disconnect and the debug log says it can't
> authorize the remote system. Since I have a dynamic IP I simply added a
> "noauth" command in the /etc/ppp/options file and that allows me to
> connect but it deosn't seem to add the ppp connection as the
> defaultroute as the log shows..
>
> I'm using KPPP as the front end to this and if I uninstall the 2.3.10
> pppd, and replace it with 2.3., the problem seems to disappear...Maybe
> there are changes in the KPPP app...??? Anyone seen this? PPPlog
> below...
>
> Thanks,
> JFeole
>
> -----
> Jan 24 20:47:18 angus pppd[1346]: pppd 2.3.7 started by root, uid 0
> Jan 24 20:47:18 angus pppd[1346]: Using interface ppp0
> Jan 24 20:47:18 angus pppd[1346]: Connect: ppp0 <--> /dev/cua1
> Jan 24 20:47:19 angus pppd[1346]: Remote message: ^D^EM-t^B^F
> Jan 24 20:47:19 angus pppd[1346]: local IP address 209.251.79.79
> Jan 24 20:47:19 angus pppd[1346]: remote IP address 209.244.43.210
> Jan 24 20:49:20 angus pppd[1346]: Terminating on signal 15.
> Jan 24 20:49:20 angus pppd[1346]: Connection terminated.
> Jan 24 20:49:20 angus pppd[1346]: Connect time 2.1 minutes.
> Jan 24 20:49:20 angus pppd[1346]: Sent 5892 bytes, received 39189 bytes.
>
> Jan 24 20:49:20 angus pppd[1346]: Exit.
> Jan 24 21:12:55 angus gpm[484]: No data
> Jan 24 21:19:17 angus gpm[484]: No data
> Jan 24 21:21:37 angus gpm[484]: No data
> Jan 24 21:24:22 angus gpm[484]: No data
>
>
>
> Jan 24 21:27:12 angus modprobe: can't locate module char-major-108
> Jan 24 21:27:12 angus pppd[1404]: pppd 2.3.10 started by root, uid 0
> Jan 24 21:27:12 angus pppd[1404]: Using interface ppp0
> Jan 24 21:27:12 angus pppd[1404]: Connect: ppp0 <--> /dev/cua1
> Jan 24 21:27:13 angus pppd[1404]: not replacing existing default route
> to eth0 [192.168.1.1]
> Jan 24 21:27:13 angus pppd[1404]: local IP address 209.251.78.67
> Jan 24 21:27:13 angus pppd[1404]: remote IP address 209.244.43.217
> Jan 24 21:27:31 angus pppd[1404]: Terminating on signal 15.
> Jan 24 21:27:31 angus pppd[1404]: Connection terminated.
> Jan 24 21:27:31 angus pppd[1404]: Connect time 0.4 minutes.
> Jan 24 21:27:31 angus pppd[1404]: Sent 251 bytes, received 291 bytes.
> Jan 24 21:27:31 angus pppd[1404]: Exit.
>
>
>
>
>
>
>
>
> ------------- End Forwarded Message -------------
>
>
>
> **********************************************************
> To unsubscribe from this list, send mail to
> [EMAIL PROTECTED] with the following text in the
> *body* (*not* the subject line) of the letter:
> unsubscribe gnhlug
> **********************************************************
>
**********************************************************
To unsubscribe from this list, send mail to
[EMAIL PROTECTED] with the following text in the
*body* (*not* the subject line) of the letter:
unsubscribe gnhlug
**********************************************************
