PK Whelan wrote:
>
> Does anyone have any tips for linux on a sparc5?
> OK, here's some background:
> It has 96M of RAM and 3 external drives. The internal drive is only a
> 510M so I'm pretty much the whole install on the externals. I got through
> the install ok and it booted up but it the machine locks up with scsi bus
> resets, they just keep scrolling by non-stop and you could hear the
> drives clicking. I thought it might just be the
> hardware so I reloaded Solaris on it and it worked fine. I decided to try
> loading linux again - and the same thing. Seeing as how this is my first
> time loading linux on a sparc I was wondering if I was missing something
> (such as any paramaters I should be passing to the kernel at boot) or
> whether I'm just SOL with this particular box.
> Thanks,
>
> ===============================================================
> PK Whelan
> ===============================================================
What model SPARC 5 is it? Which distribution of Linux are you trying to
use? I believe the 170MHz version of the SPARC 5 is not supported. You
might want to check the Ultrasparc.org page for any other info:
http://www.ultralinux.org/
Good luck,
Scott
--
_______________________________________________________________
Scott Mellott __o Clydesdale Cruiser
[EMAIL PROTECTED] -\<, http://scott.mellott.com
[EMAIL PROTECTED] (*)/(*) WSI Corporation
_______________________________________________________________
**********************************************************
To unsubscribe from this list, send mail to
[EMAIL PROTECTED] with the following text in the
*body* (*not* the subject line) of the letter:
unsubscribe gnhlug
**********************************************************
