You are using Mediaone. There are a couple of issues. First, Mediaone
validates against the MAC address of your NIC. Also, you need to configure
a dhcp client. I use SuSE so the configuration is different.
Charles Farinella wrote:
> I'm trying to add a second ethernet device to my machine.
> I'm not having much luck. When I add the second card it can't
> resolve the IP address off my cable modem.(eth0) Both cards are
> identical.
>
> I tried adding another line to /etc/conf/modules:
> alias eth0 tulip
> alias eth1 tulip
>
> I added an interface using netcfg.
> In linuxconf under basic host info I assigned individual IRQ's.
> eth0 uses IRQ12.
> I added an append line to LILO.
>
> I read the 'Multiple Ethernet Adapter Mini-HowTo'.
>
> I'd appreciate guidance.
>
> C
>
> --
> Charles Farinella
> [EMAIL PROTECTED]
>
>
>
> **********************************************************
> To unsubscribe from this list, send mail to
> [EMAIL PROTECTED] with the following text in the
> *body* (*not* the subject line) of the letter:
> unsubscribe gnhlug
> **********************************************************
>
--
--
Gerald Feldman <[EMAIL PROTECTED]>
Boston Computer Solutions and Consulting
ICQ#156300
**********************************************************
To unsubscribe from this list, send mail to
[EMAIL PROTECTED] with the following text in the
*body* (*not* the subject line) of the letter:
unsubscribe gnhlug
**********************************************************
