Ok, I went and looked at this page. How do I read what they are telling me
below.
Busmaster NO
DMA NO
BIOS YES (Does this mean there is a Bios on the SCSI controller?)
Address
Debug -
I/O Port
Interrupt
Ext.connect. CENTRONICS FEMALE 50
Length HALF
Op.system DOS,NOVELL,OS2,UNIX,XENIX
Driver -
Compatible WD1005WAH,AHA2940UW
Ceriticates
Future Domain has produced several sixteen-bit, Programmed I/O, SCSI
host bus adapters for the PC ISA bus. The table below can be used
to match the sixteen-bit SCSI adapter with the correct BIOS versions.*
BOARD BIOS
------ ------
1.0 3 2.0 3 3.0 3 3.2 3 3.4 3 3.5 3
TMC1610 3 3 3 3 X 3 X 3
TMC1650 X 3 X 3 X 3 X 3 X 3 X 3
TMC1660 X 3 X 3 X 3 X 3 X 3 X 3
TMC1670 X 3 X 3 X 3 X 3 X 3 X 3
TMC1680 X 3 X 3 X 3 X 3 X 3 X 3
Jerry
>Not sure if this is relevant. At Polaroid, we had problems with the
>SparcStations recognizing the juke boxes. Your FutureDomain controller
>probably only recognizes device number 0 through 6. Check the LU
>number on your hard drive and make sure that it is in the range 0 through
>6. I have also seen problems with the LU of a drive set to 0. Most SCSI
>controllers have boot up settings.
>
>Another thing you might need to do is to add a terminator.
>
>On 23 Aug 2000, at 9:48, Jerry Kubeck wrote:
>
>> Help!!!
>>
>> I have an old 486 I am trying to make into my home server (TurboLinux
>> server). I purchased a 2.1GB Seagate hardrive and was given a Future Domain
>> SCSI controller. I also have an IDE 203 MG h/d in the computer now.
>Jerry Feldman <[EMAIL PROTECTED]>
>Associate Director
>Boston Linux and Unix user group
>http://www.blu.org
>
>**********************************************************
>To unsubscribe from this list, send mail to
>[EMAIL PROTECTED] with the following text in the
>*body* (*not* the subject line) of the letter:
>unsubscribe gnhlug
>**********************************************************
-----------------------------------------------------------------
Jerry Kubeck Customer Support Appropriate Solutions, Inc.
[EMAIL PROTECTED] www.AppropriateSolutions.com
**********************************************************
To unsubscribe from this list, send mail to
[EMAIL PROTECTED] with the following text in the
*body* (*not* the subject line) of the letter:
unsubscribe gnhlug
**********************************************************
