On Sun, 6 Jan 2002, Rob Round wrote:
> The NIC's recognize ok and the eepro100 module is loaded however, I
> can't get any traffic though the card ...

  You might try Intel's site.  Intel actually does provide some native Linux
drivers, complete with source, that work better (or worse, YMMV) than the
ones in the mainstream kernel.  Also try <http://www.scyld.com>.  Scyld
employs Donald Becker, who is *the* Linux network adapter driver guy.
There is often good information and/or driver updates to be found there.

  Be aware that just about every NIC Intel makes is called an "EtherPro
100".  One often has to read part numbers off chips to accomplish positive
identification.

> The only thing I could find was a document that said to recompile the
> kernel without the IO-APIC option but my kernel didn't have that module
> loaded.

  Not every kernel compile option is a module.  In particular, IO-APIC
support is not.  APIC = Advanced Programmable Interrupt Controller, and it is
very low-level, so it affects the entire kernel.  Support for IO-APIC is
required for SMP, but you can have IO-APIC without SMP.  Try booting a
uni-processor kernel to see if that makes the problems go away.  Since you
only have one processor anyway, the SMP support is not gaining you anything,
and in fact adds overhead which might slow things down.

  FWIW, I have seen various weird problems for SMP boards with only a single
processor.  In at least one case, the system locked *hard* (power-cycle
required) if the network interface was brought down.

  Hope this helps,

-- 
Ben Scott <[EMAIL PROTECTED]>
| The opinions expressed in this message are those of the author and do not |
| necessarily represent the views or policy of any other person, entity or  |
| organization.  All information is provided without warranty of any kind.  |


*****************************************************************
To unsubscribe from this list, send mail to [EMAIL PROTECTED]
with the text 'unsubscribe gnhlug' in the message body.
*****************************************************************

Reply via email to