Dear Markus, here is my log of the command, "g.region -d -u -p":
(Tue Aug 27 09:23:26 2019) g.region -d -u -p 360 degree EW extent is exceeded by 1.99983 cells 360 degree EW extent is exceeded by 1.99983 cells projection: 3 (Latitude-Longitude) zone: 0 datum: wgs84 ellipsoid: wgs84 north: 75:00:29.99892N south: 65:00:29.999064S west: 180:00:29.997408W east: 180:00:29.997408E nsres: 0:00:30 ewres: 0:00:30 rows: 16802 cols: 43202 cells: 725880004 (Tue Aug 27 09:23:26 2019) Command finished (0 sec) On Mon, Aug 26, 2019 at 4:01 PM Markus Metz <[email protected]> wrote: > > > On Mon, Aug 26, 2019 at 1:14 AM Gabriel Cotlier <[email protected]> > wrote: > > > > Dear Markus, > > > > I uninstall and reinstall grass 7.6.1 64 bits and still my log for the > commands > > > > g.region -p > > > > and > > > > g.region -p n=75:00:15N s=65:00:15S w=179:59:45W e=180:00:15E > res=00:00:30 > > > > are respectively : > > > > (Sun Aug 25 20:01:47 2019) > > > g.region -p > > > 360 degree EW extent is exceeded by 1.99983 cells > > projection: 3 (Latitude-Longitude) > > zone: 0 > > datum: wgs84 > > ellipsoid: wgs84 > > north: 75:00:15N > > south: 65:00:15S > > west: 179:59:45W > > east: 180:00:15E > > nsres: 0:00:30 > > ewres: 0:00:30 > > rows: 16801 > > cols: 43200 > > cells: 725803200 > > (Sun Aug 25 20:01:47 2019) Command finished (0 sec) > > > (Sun Aug 25 20:02:10 2019) > > > > g.region -p n=75:00:15N s=65:00:15S w=179:59:45W e=180:00:15E > res=00:00:30 > > 360 degree EW extent is exceeded by 1.99983 cells > > Strange, the region defined with "n=75:00:15N s=65:00:15S w=179:59:45W > e=180:00:15E res=00:00:30" should not cause a message like > "360 degree EW extent is exceeded by 1.99983 cells" > > Maybe the default region has strange settings. What is the output of > "g.region -d -u -p" ? > > Markus M > > > projection: 3 (Latitude-Longitude) > > zone: 0 > > datum: wgs84 > > ellipsoid: wgs84 > > north: 75:00:15N > > south: 65:00:15S > > west: 179:59:45W > > east: 180:00:15E > > nsres: 0:00:30 > > ewres: 0:00:30 > > rows: 16801 > > cols: 43200 > > cells: 725803200 > > (Sun Aug 25 20:02:10 2019) Command finished (0 sec) > > > > Are the resulting intercallibrated layers ready for further use outside > grass exported as GeoTIFF or I need to get inside grass without any > messages that 360 degree EW extent is exceeded for the layer to be OK? > > > > further more I would like to ask if maybe the max and min for > intercallibtated layer are somewhere already available to check whether the > max and min I got are correct? > > Thanks a lot for your help. > > Regards, > > Gabriel > > > > > > >
_______________________________________________ grass-user mailing list [email protected] https://lists.osgeo.org/mailman/listinfo/grass-user
