What should I do in this case? On Tue, Aug 27, 2019 at 9:24 AM Gabriel Cotlier <gabikl...@gmail.com> wrote:
> Dear Markus, > > here is my log of the command, "g.region -d -u -p": > > > (Tue Aug 27 09:23:26 2019) > > g.region -d -u -p > > 360 degree EW extent is exceeded by 1.99983 cells > 360 degree EW extent is exceeded by 1.99983 cells > projection: 3 (Latitude-Longitude) > zone: 0 > datum: wgs84 > ellipsoid: wgs84 > north: 75:00:29.99892N > south: 65:00:29.999064S > west: 180:00:29.997408W > east: 180:00:29.997408E > nsres: 0:00:30 > ewres: 0:00:30 > rows: 16802 > cols: 43202 > cells: 725880004 > (Tue Aug 27 09:23:26 2019) Command finished (0 sec) > > > > > On Mon, Aug 26, 2019 at 4:01 PM Markus Metz <markus.metz.gisw...@gmail.com> > wrote: > >> >> >> On Mon, Aug 26, 2019 at 1:14 AM Gabriel Cotlier <gabikl...@gmail.com> >> wrote: >> > >> > Dear Markus, >> > >> > I uninstall and reinstall grass 7.6.1 64 bits and still my log for the >> commands >> > >> > g.region -p >> > >> > and >> > >> > g.region -p n=75:00:15N s=65:00:15S w=179:59:45W e=180:00:15E >> res=00:00:30 >> > >> > are respectively : >> > >> > (Sun Aug 25 20:01:47 2019) >> >> > g.region -p >> >> > 360 degree EW extent is exceeded by 1.99983 cells >> > projection: 3 (Latitude-Longitude) >> > zone: 0 >> > datum: wgs84 >> > ellipsoid: wgs84 >> > north: 75:00:15N >> > south: 65:00:15S >> > west: 179:59:45W >> > east: 180:00:15E >> > nsres: 0:00:30 >> > ewres: 0:00:30 >> > rows: 16801 >> > cols: 43200 >> > cells: 725803200 >> > (Sun Aug 25 20:01:47 2019) Command finished (0 sec) >> >> > (Sun Aug 25 20:02:10 2019) >> > >> > g.region -p n=75:00:15N s=65:00:15S w=179:59:45W e=180:00:15E >> res=00:00:30 >> > 360 degree EW extent is exceeded by 1.99983 cells >> >> Strange, the region defined with "n=75:00:15N s=65:00:15S w=179:59:45W >> e=180:00:15E res=00:00:30" should not cause a message like >> "360 degree EW extent is exceeded by 1.99983 cells" >> >> Maybe the default region has strange settings. What is the output of >> "g.region -d -u -p" ? >> >> Markus M >> >> > projection: 3 (Latitude-Longitude) >> > zone: 0 >> > datum: wgs84 >> > ellipsoid: wgs84 >> > north: 75:00:15N >> > south: 65:00:15S >> > west: 179:59:45W >> > east: 180:00:15E >> > nsres: 0:00:30 >> > ewres: 0:00:30 >> > rows: 16801 >> > cols: 43200 >> > cells: 725803200 >> > (Sun Aug 25 20:02:10 2019) Command finished (0 sec) >> > >> > Are the resulting intercallibrated layers ready for further use outside >> grass exported as GeoTIFF or I need to get inside grass without any >> messages that 360 degree EW extent is exceeded for the layer to be OK? >> > >> > further more I would like to ask if maybe the max and min for >> intercallibtated layer are somewhere already available to check whether the >> max and min I got are correct? >> > Thanks a lot for your help. >> > Regards, >> > Gabriel >> > >> > >> > >> >
_______________________________________________ grass-user mailing list grass-user@lists.osgeo.org https://lists.osgeo.org/mailman/listinfo/grass-user