imported into QGIS layer visible and the of the layer properties are: [image: image.png]
On Tue, Aug 27, 2019 at 9:27 AM Gabriel Cotlier <gabikl...@gmail.com> wrote: > while for individual raster maps I get: > > [image: image.png] > > On Tue, Aug 27, 2019 at 9:25 AM Gabriel Cotlier <gabikl...@gmail.com> > wrote: > >> What should I do in this case? >> >> On Tue, Aug 27, 2019 at 9:24 AM Gabriel Cotlier <gabikl...@gmail.com> >> wrote: >> >>> Dear Markus, >>> >>> here is my log of the command, "g.region -d -u -p": >>> >>> >>> (Tue Aug 27 09:23:26 2019) >>> >>> g.region -d -u -p >>> >>> 360 degree EW extent is exceeded by 1.99983 cells >>> 360 degree EW extent is exceeded by 1.99983 cells >>> projection: 3 (Latitude-Longitude) >>> zone: 0 >>> datum: wgs84 >>> ellipsoid: wgs84 >>> north: 75:00:29.99892N >>> south: 65:00:29.999064S >>> west: 180:00:29.997408W >>> east: 180:00:29.997408E >>> nsres: 0:00:30 >>> ewres: 0:00:30 >>> rows: 16802 >>> cols: 43202 >>> cells: 725880004 >>> (Tue Aug 27 09:23:26 2019) Command finished (0 sec) >>> >>> >>> >>> >>> On Mon, Aug 26, 2019 at 4:01 PM Markus Metz < >>> markus.metz.gisw...@gmail.com> wrote: >>> >>>> >>>> >>>> On Mon, Aug 26, 2019 at 1:14 AM Gabriel Cotlier <gabikl...@gmail.com> >>>> wrote: >>>> > >>>> > Dear Markus, >>>> > >>>> > I uninstall and reinstall grass 7.6.1 64 bits and still my log for >>>> the commands >>>> > >>>> > g.region -p >>>> > >>>> > and >>>> > >>>> > g.region -p n=75:00:15N s=65:00:15S w=179:59:45W e=180:00:15E >>>> res=00:00:30 >>>> > >>>> > are respectively : >>>> > >>>> > (Sun Aug 25 20:01:47 2019) >>>> >>>> > g.region -p >>>> >>>> > 360 degree EW extent is exceeded by 1.99983 cells >>>> > projection: 3 (Latitude-Longitude) >>>> > zone: 0 >>>> > datum: wgs84 >>>> > ellipsoid: wgs84 >>>> > north: 75:00:15N >>>> > south: 65:00:15S >>>> > west: 179:59:45W >>>> > east: 180:00:15E >>>> > nsres: 0:00:30 >>>> > ewres: 0:00:30 >>>> > rows: 16801 >>>> > cols: 43200 >>>> > cells: 725803200 >>>> > (Sun Aug 25 20:01:47 2019) Command finished (0 sec) >>>> >>>> > (Sun Aug 25 20:02:10 2019) >>>> > >>>> > g.region -p n=75:00:15N s=65:00:15S w=179:59:45W e=180:00:15E >>>> res=00:00:30 >>>> > 360 degree EW extent is exceeded by 1.99983 cells >>>> >>>> Strange, the region defined with "n=75:00:15N s=65:00:15S w=179:59:45W >>>> e=180:00:15E res=00:00:30" should not cause a message like >>>> "360 degree EW extent is exceeded by 1.99983 cells" >>>> >>>> Maybe the default region has strange settings. What is the output of >>>> "g.region -d -u -p" ? >>>> >>>> Markus M >>>> >>>> > projection: 3 (Latitude-Longitude) >>>> > zone: 0 >>>> > datum: wgs84 >>>> > ellipsoid: wgs84 >>>> > north: 75:00:15N >>>> > south: 65:00:15S >>>> > west: 179:59:45W >>>> > east: 180:00:15E >>>> > nsres: 0:00:30 >>>> > ewres: 0:00:30 >>>> > rows: 16801 >>>> > cols: 43200 >>>> > cells: 725803200 >>>> > (Sun Aug 25 20:02:10 2019) Command finished (0 sec) >>>> > >>>> > Are the resulting intercallibrated layers ready for further use >>>> outside grass exported as GeoTIFF or I need to get inside grass without any >>>> messages that 360 degree EW extent is exceeded for the layer to be OK? >>>> > >>>> > further more I would like to ask if maybe the max and min for >>>> intercallibtated layer are somewhere already available to check whether the >>>> max and min I got are correct? >>>> > Thanks a lot for your help. >>>> > Regards, >>>> > Gabriel >>>> > >>>> > >>>> > >>>> >>>
_______________________________________________ grass-user mailing list grass-user@lists.osgeo.org https://lists.osgeo.org/mailman/listinfo/grass-user