Hi Andreas, On Tue, Apr 3, 2018 at 7:08 PM, Andreas Kemnade <andr...@kemnade.info> wrote: > On Tue, 3 Apr 2018 13:28:08 +0200 > Sven Dyroff <s.dyr...@phytec.de> wrote: > >> Hello Nikolaus, >> >> over the easter holidays I found the screenshot function of QtMoko again. >> I just had forgotten that it exists. It's under "Applications" / >> "Screenshot" and works fine by using time delay. >> >> Attached you'll find a picture that a) proves that it works and b) shows >> that camera does not work for unknown reason... >> >> Why is this the case? I thought camera should work with current Linux >> kernels, or am I wrong? >> > The camera works to some degree with current kernels but afaik is was > never supported by qtmoko in userspace. And probably something has to > be updated. > >> Furthermore I found that under "Settings" / "Startup Flags" there's an >> option "Modem" / "Use Dummy Modem Device". But unfortunately activating >> this seem to doesn't effectuate anything. But meanwhile I was able to >> solve the problem with acting as SJ by having found an old and expired SIM >> in my cupboard. It's not able to connect to any network anymore, but >> having this inside the GTA04A5 I'm at least able to enter a valid PIN. >> >> I also found that obviously under "Settings" / "Security" you're able to >> deactivate asking for PIN, but this is something that I don't want to try >> out because I don't want to find out if this will also deactivate asking >> for PIN in case that I put a valid SIM into the phone. >> >> So in the end there remained two more new questions in addition to the >> older ones: >> >> a) How is it possible to get the camera working? >> >> b) Testing makes only sense in case that there're are any developers >> outside who are able and willing to correct found errors / problems. So >> are there any Qt 4.8 developers outside for QtMoko or do we have "only" >> Linux kernel developers? Or in other words: What should be tested and what >> doesn't need to be? >> > Well, many problems are not really qt specific, so it can be helpful. > So especially any regressions (compared to your v55 with old kernel) are > interesting. Before doing anything more on that, the next step > would be to build with current qt and test there. I probably will start > my build system this evening to do some experiments I'm bit lost and I did some searching and cannot find exact steps how to build qtmoko (basically on my PC). Which instructions will you use? Thanks.
I'm familiar with Qt framework so I can help with fixing some bugs. > > Regards, > Andreas > > _______________________________________________ > Gta04-owner mailing list > Gta04-owner@goldelico.com > http://lists.goldelico.com/mailman/listinfo.cgi/gta04-owner > BR, marek -- as simple and primitive as possible ------------------------------------------------- Marek Belisko - OPEN-NANDRA Freelance Developer Ruska Nova Ves 219 | Presov, 08005 Slovak Republic Tel: +421 915 052 184 skype: marekwhite twitter: #opennandra web: http://open-nandra.com _______________________________________________ Gta04-owner mailing list Gta04-owner@goldelico.com http://lists.goldelico.com/mailman/listinfo.cgi/gta04-owner