I thought about putting grease zerks in the swingarm/linkages on my GTS, and my
WR (seems Yamaha doesn't put Zerks in.) But after inspecting the seals and
talking to several technitians I decided not to put zerks in for a couple
reasons. #1 You can blow the seals out using a grease gun with these type of
seals. #2 If you remove the swingarm/linkage yearly you have chance to check
for wear and tear. Oh, on a GTS it is a very good idea to grease the FRONT
swingarm bearings yearly, specificly the upper front arm bearings.
Louis
"nicholas.threader" wrote:
> Has anyone fitted grease nipples to the rear linkage ?
> I'm sure this question has come up before , but can't remember what the info
> was .
> If anyone has , how did you cope with the forward most needle roller bearing
> when installing the grease nipple .
>
> Nick T
>
> ---
> Outgoing mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.256 / Virus Database: 129 - Release Date: 31/05/2001
