Nick, the word land in the good ol' US of A means to find.
Thanks for your help.
George.
----- Original Message -----
From: "nicholas.threader" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Wednesday, June 27, 2001 12:24 PM
Subject: Re: Throttle body sync
> Hi George ,
> Go back to the screws and set them mid way ( about 2 turns out from fully
> turned in ) then use the butterfly screws to sync the throttle flaps , as
> Jeff said sync 1&2 then 3&4 then sync them together.
>
> To check the calibration use just one cylinder , plug on one of the gauges
> and take a reading , then without stopping the engine pull the gauge off
and
> plug on the next one , from this you should be able to see how far out the
> gauges are .
>
> >BTW it took for ever to land the 6mm ports .
> could you explain your meaning of the word "land"
>
> atb Nick T
>
>
> ---
> Outgoing mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.262 / Virus Database: 132 - Release Date: 12/06/2001
>
