This past Tuesday we just finished replacing the stock exhaust with a complete system for a 93 FZR 1000 from D&D; the pipes and the mufler are a direct bolt on; the challenge was the connector in between. We had to cut it were it goes from 2 into 1, rotate it 180, bent the pipe 2" and then rewelded; we also had to drill the hole for the nut for the oxygen sensorand welded. To fit the new system we had to take the center stand off and to cut the right bracket otherwise the connector would not fit. The bike felt a lot lighter and the response is a lot quicker; Ofcourse it is louder too. Very please with the change, I hope this will help anybody that is thinking of improving the bike's performance. Ed. ----- Original Message ----- From: "Rick Davids" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Friday, November 09, 2001 3:58 PM Subject: Re: Rear fender-ectomy
> Yeah, I'd be interested in that too. And any other aftermarket pipe > recommendations out there. Hope to replace my lowside bashed pipe sometime > this winter. > > > Noticed the D&D pipe. What details, part number, rewokeing to fit > does > > that take. > > > > Ken in Va. > >
