Make sure all fittings are tight! Don't ask how I know :-) George pumping & pumping & pumping
----- Original Message ----- From: "wghalley" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, April 24, 2002 11:51 PM Subject: Bleeding front brake > I've got a problem, hopefully someone can help. > > I just installed the Zeigler SS brake lines & bled them out. The back's > fine but I can't seem to get the front air free. Of course I removed > the front caliper & rotated it so bleeder was up. Got a bunch of air > out. Pushed two resevoir's full of fluid through after I got the last > bubbles. Put the caliper back on & have VERY mushy brakes. I can pump > it up but the first grab goes all the way to the grip. I've cycled the > ABS through it's test thinking that I might have air trapped in it. It > works fine. > > I'll let it sit over night & try again tomorrow in case some little > bubbles will float out. > > What I'm afraid of is that there is air in one of the lines going to or > coming from the ABS. If so, can I push this out by pumping more fluid > through or do I need to prefill the lines? > > Any help greatly appreciated. > > Bill >
