Maybe you have the muffler bracket bolted on the outside of the aluminum support instead of the inside. I've seen that done before...
Joe. -----Original Message----- From: Kevin Harrington [mailto:[EMAIL PROTECTED]] Sent: Wednesday, August 21, 2002 4:48 PM To: [EMAIL PROTECTED] Subject: Re: Touching down hard parts... Have you moved your footpegs up? I'm 3/4's folded up before the pipe even comes close to touching--good job Rick!!! FL (can only turn right) Kev --- Rick Davids <[EMAIL PROTECTED]> wrote: > For the second time since I went back to the stock > pipe I touched it down in > a turn last weekend. This time a little more > dramatic as the rear wheel > stepped out a bit. Just curious. Am I the only one > with this problem? We do > have some seriously tight canyon roads in So. Cal > mind you(This time, Spunky > Cyn, for those in the know). > No matter, I'm using this as an excuse to get the > Renegade pipe. It'll be > much safer donchaknow. Heh, well it's still a > low-mount pipe, but I'm > thinking the smaller diameter and oval cut will give > me the little bit of > extra clearance I need ;-) ======================================================================================NOTICE - This communication may contain confidential and privileged information that is for the sole use of the intended recipient. Any viewing, copying or distribution of, or reliance on this message by unintended recipients is strictly prohibited. If you have received this message in error, please notify us immediately by replying to the message and deleting it from your computer. ==============================================================================
